Text/Image Mode; Color And B&W Mode Switch; Switchable Video Inputs; Switchable Rgb Inputs - Qomo QD700 Manual

Hide thumbs Also See for QD700:

Table of Contents

TEXT/IMAGE MODE

Press the "TEXT" button to switch between image/text modes. To

display a text file, switch to the text mode to get a clearer text effect.

(On the remote control)

COLOR AND B&W MODE SWITCH

Press "B&W" once to enter the Black & White mode; Press again to

return to the Color mode.

Press the "S-VIDEO/VIDEO" button to switch among S-Video and

Video signals.

Use the "CCD/PC1/PC2" button to switch among CCD and different

RGB signals. Each time the "CCD/PC1/PC2" button is pressed, it

provides seamless transitions among different sources such as

Camera (CCD)、COMPUTER(IN)、and RGB (IN).

Notes: RGB OUT always outputs RGB IN signals.

Press the "POWER" button to turn on the visualizer's power and

press the "Ppw" button to turn the projector power on. To turn the

projector standby after use, press the "Ppw" button more than 2

seconds, and then the projector enters to the stand-by mode. (On the

remote control, press the "PROJECTOR POWER" button)

Note: Please connect the projector RS232 cable between the

projector and the visualizer first. If you cannot switch projector inputs

by pressing this button, you need to manually program the RS232

code into the visualizer. See the section "Controlling Projector with

Visualizer" for detailed instruction.

Table of Contents

Show Quick Links

Table of Contents