Focusing; Freezing Image; Brightness Adjustment; White Balance Adjustment - Qomo QD700 Manual

FOCUSING

When the visualizer is turned on the focus automatically adjusts to
the stage, it is not necessary to readjust the focus if you are only
working with flat materials (text, photos, etc.). Only 3D objects
require a focus adjustment.
Press the "AUTO" button to auto focus.
Press the "FAR" or "NEAR" button once to focus manually.

FREEZING IMAGE

Press the "Frz" button to freeze the image. When the output signal is
RGB, in order to show a still image on the screen, press the "Frz"
button. The frozen image can't be adjusted (Zoom in/out, color
adjustment, etc.).
Note: This function is not available on S-Video and Video
output.

BRIGHTNESS ADJUSTMENT

If the image effect is not satisfactory, you can adjust the brightness to
get a better image effect. Use the "BRIGHT +" or "BRIGHT -" button
to adjust the brightness. To increase the brightness, press the
"BRIGHT +" button. To decrease it, press the "BRIGHT -" button. To
go back to the initial brightness press the "AUTO" button.

WHITE BALANCE ADJUSTMENT

Each time the lighting condition changes, the user should adjust the
white balance of the CCD.
Press the "AUTO" button to adjust the white balance automatically.

AUTO ADJUSTMENT

Press the "AUTO" button to auto adjust the white balance and the
focus. The whole process takes about 10 seconds.
15