Stopping Engine; Operating Blower - Echo PB-8010 H Operator's Manual

OPERATION

Stopping Engine

PB-8010 H
1. Throttle Lever
Move throttle lever (A) to IDLE
position and allow engine to
return to idle before shutting off
engine.
2. Throttle Lever
Move throttle lever (A) to (STOP)
position.
PB-8010 T
1. Throttle Lever
Release throttle trigger. Move
Throttle Lever (A) forward to idle
position and allow engine to
return to idle before shutting off
engine.
2. Throttle Lever
Move Throttle Lever (A) all the
way forward to STOP position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.

Operating Blower

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a
poison gas. Breathing CO can cause unconsciousness, serious
injury, or death. Exhaust can cause serious burns. ALWAYS
position unit so that exhaust is directed away from your face
and body.
30
PB-8010 H
PB-8010T
PB-8010 H/T
A
A
X7501200001
© 11/2018 ECHO Inc.