Page 2
Installation Connecting AC Power Connecting Station Wires Connecting Sensors or Flow Meters Connecting to a Wi-Fi Network App Configuration...
Page 5
Note: The indoor Pro-HC is not water or weather resistant, and must be installed indoors or in a protected area. This device is not intended for use by young children. Never let children play with this device.
Page 6
(Black) NEUTRAL (White) GROUND (Green) Note: To be performed by a licensed electrician only. Always use UL listed ½" (13 mm) conduit with male adapter when installing AC wiring. Pro-HC controllers are intended to be supplied AC power with an over-current protected device. Improper installation could result in shock or fire hazard.
Page 8
Wiring for standard Hydrawise 0.75" (20mm) or 1" (25mm) flow meters is as follows: Flow Meter Wire Label on Controller Blue SEN-1, SEN-2 White SEN COM Not connected Wiring for open/closed contact sensors is as follows: Sensor Wire Label on Controller Normally Open / SEN-1, SEN-2 Normally Closed wire...