Table of Contents
Advertisement
❹ Adjust boundaries of a projected image [EDGE BLENDING]
This projector is equipped with an "EDGE BLENDING Function" that makes the edges (boundaries) of the projection
screen indistinguishable.
NOTE:
• Before performing the Edge Blending function, place the projector in the correct position so that the image becomes square in
the appropriate size, and then make optical adjustments (lens shift, focus, and zoom).
• Adjust the brightness of each projector using [REF. LIGHT ADJUST] under [REF. LIGHT MODE]. In addition, use [REF. WHITE
BALANCE] to adjust the [CONTRAST], [BRIGHTNESS] and [UNIFORMITY].
The following procedure shows an example of four projectors in a 2 × 2 layout.
Projected area
Projected area
Projected area
Edge Blending area
64
4. Multi-Screen Projection
Projected area
Advertisement
Table of Contents
