Table of Contents
Advertisement
❻ Turning off the Projector
1. Press the
(POWER) button on the projector cabinet or
the POWER OFF button on the remote control.
The [POWER OFF / ARE YOU SURE ? / CARBON SAVINGS-
SESSION 0.000[g-CO2]] message will appear.
2. Press one among the ENTER, the
POWER OFF button.
The light source will be turned off and the power supply will
be cut. The projector will go to sleep state and the POWER
indicator will light in green. If no operation is performed on the
projector and no signal is input to the projector, the projector
will be in standby state. (In the state, the standby mode is
NORMAL.)
• If you do not want to turn off, select [NO] by ◀/▶button and
press ENTER.
3. Make sure the projector is in STANDBY MODE, then turn
off the main power switch (○ OFF)
The POWER indicator will go off and the main power will turn
off.
• While the POWER indicator is blinking blue in short cycles,
the power cannot be turned off.
CAUTION:
Parts of the projector may temporarily overheat if the projector is turned off with the main power switch or the AC
power supply is disconnected while the projector is in operation or the cooling fan is running. Handle with care.
2. Projecting an Image (Basic Operation)
(POWER), and the
33
Power On
Steady blue light
Sleep
Steady green light
Advertisement
Table of Contents
