Cabinet Disassembly Instructions - Magnavox CMWR10D6 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Front Assembly
[3] DVD Mechanism & DVD Main CBA Assembly
[4] SW CBA
[5] PCB Holder
[6] Rear Panel
[7] AV CBA
2. Disassembly Method
ID/
Loc. Part
Fig.
No.
No.
[1] Top Cover D1 7(S-1)
Front
[2] D2 *6(L-1), *3(L-2)
Assembly
DVD
4(S-2), *CN101,
Mechanism
*CN701,
[3] & DVD Main D3
Locking Card Spacers,
CBA
Main Sheet
Assembly
(S-3), S Earth Plate,
[4] SW CBA D4
Desolder
[5] PCB Holder D4 2(S-4)
[6] Rear Panel D5 2(S-5), 6(S-6)
[7] AV CBA D5 3(S-7)
↓ ↓ ↓
(1) (2) (3)
Removal
Remove/*Unhook/
Unlock/Release/ Note
Unplug/Desolder
---
1
---
---
---
---
---
↓ ↓
(4) (5)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
[1] Top Cover
(S-1)
1-5-1
(S-1)
(S-1)
Fig. D1
E7A60DC