Table of Contents
Advertisement
Antenna connections
If you are using an indoor or outdoor
antenna, followthe
instructions belowthat correspond to your antenna
system, if you are using a Cable TV service, see page 11 for Cable TV connections.
Combination
VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead
wire)
Antenna
Antenna
jack
jack
75 ohm
Coaxial
Cable
300-75 ohm
Matching
Transformer
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination
VHF/UHF antenna has a 300
ohm twin-lead
wire, the use of the 300-75 ohm
matching transformer
may be necessary.
I
ntenna
300-75 ohm
JaSL _
MatCshfingm e r
CH°Fm_I i e I
ohm
,
Combination
VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin=lead wires)
_"
Connect the UHF 300 ohm twin-lead wire to the
Combiner
(not supplied).
Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm Matching
Transformer.
Attach the Transformer
to the Com-
biner, then attach the Combiner to the Antenna
Jack.
r
A _tenkn a
Com_bine___ohm
J
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin=lead wires)
"
=_
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead
wire to the Combiner
(not supplied).
Attach the Combiner to the Antenna Jack.
10
Advertisement
Table of Contents
