Table of Contents
Advertisement
Connections to other equipment
The exact arrangement you use to interconnect various video and audio components
to the LCD TV is
dependent on the model and features of each component. Check the Owner's Manual provided with each
component for the location of video and audio inputs and outputs.
The connection diagrams below are offered as suggestions. You may need to modify them to accommodate
your particular assortment
of components. The diagrams are intended to show component video and audio
interconnections
only.
To connect the LCD TV to a VCR
Left side of the LCD TV
To AUDIO/VIDEO
IN 1 (or 2)
5)@ (6)
_
Audio/Video cord (not supplied)
Ol
To AudioNideo
OUT
To connect
the LCD TV to a VCR with
an S-Video
cord
If you connect aVCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the LCD TV, you must also
connect the audio cords to the AUDIO IN jacks on the rear of the LCD TV.The S-VIDEO cord only carries the
video signal. The audio signal is separate.
Left side of the LCD TV
To S-VIDEO IN 1
©_
S-Video cord (not supplied)
u ,oco=n
© (o__
'
( ot supplied)
@©@
To AUDIO IN 1
©
To S-Video OUT
/
To Audio OUT
NOTE:
When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord takes
precedence over the video cord.
12
Advertisement
Table of Contents
