Antenna Connections - Sansui HDLCD2600 Owner's Manual

Antenna connections
if you are using an indoor or outdoor anten na, follow the instructions below that correspond to your anten na
system, if you are using a Cable TV service, see page 11 for Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin=lead wire)
Antenna Antenna
jack jack
75 ohm
Coaxial
Cable
300-75 ohm
Matching
Transformer
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
I ntenna 300-75 ohm
TMratnCshinrgm er
Combiner
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)
_" Connect the UHF 300 ohm twin-lead wire to the
Combiner (not supplied). Connect the VHF 300
ohm twin-lead wire to the 300-75 ohm Matching
Transformer. Attach the Transformer to the Com-
biner, then attach the Combiner to the Antenna
Jack.
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin=lead wires)
_ Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the Combiner (not supplied).
Antenna Attach the Combiner to the Antenna Jack.
| jack
Com_bin_H_ _ _ h_m V(_oh m
10