Table of Contents
Advertisement
OWNER'S MANUAL
MANUAL DE INSTRUCCIONES
19" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER
TELEVISOR LCD TFT DE 19" CON SINTONIZADOR DIGITAL
HDLCD1908
HDLCD1908A
HDLCD1908B
HDLCD1908C
If you purchase a universal remote control from your local retailer, please contact the remote manufac-
turer for the required programming code.
Si usted a comprado un control de remoto universal, por favor comunicase con el fabricante para el
código de programación requerido.
When shipped from the factory, the Signal Type option is set to the "Cable" (Cable Television) mode. If
not using Cable TV, set this menu option to the "Air" position.
Al salir la unidad de fábrica, la opción Signal Type se ajusta al modo de "Cable" (Televisión por cable).
Si no utiliza CATV, ajuste esta opción de menú al modo de "Air".
SI REQUIERE CONTACTAR SERVICIO AL CLIENTE POR FAVOR TENGA EL NÚMERO DE
FOR INFORMATION ON OUR OTHER PRODUCTS AND RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
PARA INFORMACIÓN SOBRE OTROS PRODUCTOS E INFORMACIÓN SOBRE RECICLAJE,
Antes de usar la unidad, lea detenidamente este manual de instrucciones.
Downloaded from
www.Manualslib.com
AIR/CABLE MODE SELECTION
SELECCION DE MODO DE AIR/CABLE
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL
MODELO LISTO ANTES LLAMAR
CUSTOMER SERVICE – 1-800-289-0980
SERVICIO AL CLIENTE – 1-800-289-0980
SITIO WEB DE ORION
POR FAVOR VISITE NUESTRO SITIO WEB EN
www.orionsalesinc.com
Before operating the unit, please read this manual thoroughly.
manuals search engine
ATTENTION
ATENCION
ORION WEBSITE
Advertisement
Table of Contents
Related Manuals for Sansui HDLCD1908
Summary of Contents for Sansui HDLCD1908
- Page 1 OWNER’S MANUAL MANUAL DE INSTRUCCIONES 19" WIDE TFT LCD TELEVISION WITH DIGITAL TUNER TELEVISOR LCD TFT DE 19" CON SINTONIZADOR DIGITAL HDLCD1908 HDLCD1908A HDLCD1908B HDLCD1908C ATTENTION ATENCION If you purchase a universal remote control from your local retailer, please contact the remote manufac- turer for the required programming code.
-
Page 2: Location Of The Required Marking
ENGLISH The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELECTRIC The exclamation point within an... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all applicable instructions. 5) Do not use this apparatus near water. 6) Clean only with a clean dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. - Page 4 IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
-
Page 5: Safety Precautions
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. -
Page 6: Table Of Contents
Contents PREPARATIONS IMPORTANT SAFETY INSTRUCTIONS ........3 SAFETY PRECAUTIONS .............. 5 Contents ..................6 Features ..................7 Power source ................. 7 Parts and functions ................ 8 Remote control ................9 Antenna connections ..............10 Cable TV connections ..............11 Connections to other equipment ..........12 Setting the language .............. -
Page 7: Features
Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. •... -
Page 8: Parts And Functions
Parts and functions Front INPUT/ENTER VOLUME POWER button button +/– buttons MENU button CHANNEL ▼/▲ buttons POWER indicator Red: Standby Green: On Remote sensor Rear side AC INPUT jack RF (ANT) IN jack COMPONENT/AUDIO (L/R) IN jacks COAXIAL DIGITAL AUDIO OUT jack PC AUDIO jack VIDEO IN jacks (VIDEO/S-VIDEO/AUDIO (L/R)) -
Page 9: Remote Control
Remote control 6.MENU Button - Use to display the On-Screen menu function. 7.RESET Button - Press to reset the On-Screen picture adjustments to their factory preset positions. To use this function, select “Picture” or “Audio” in the menu screen, then press this button. 8.INPUT Button - Use to change the external input. -
Page 10: Antenna Connections
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Connect the 75 ohm cable from the combination Antenna VHF/UHF antenna to the antenna jack. -
Page 11: Cable Tv Connections
Cable TV connections This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company. -
Page 12: Connections To Other Equipment
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to the LCD TV is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. The connection diagrams below are offered as suggestions. - Page 13 Connections to other equipment To connect the LCD TV to a DVD player with component video If your DVD player has component video out jacks, connect your LCD TV to a DVD player using a component video cord. It can greatly enhance picture quality and performance. Rear of the LCD TV To COMPONENT AUDIO To Audio OUT...
- Page 14 Connections to other equipment Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, or etc.
-
Page 15: Setting The Language
Setting the language Air - VHF/UHF channels Cable - CABLE TV channels You can choose from three different languages Auto Ch Memory (English, French and Spanish) for the on-screen Signal Type Cable displays. Automatic Search Start Select the language you prefer first, then proceed with the other menu options. -
Page 16: Tv Operation
Adding Channel Add/Delete If you find a new digital channel unregistered, you can Adding Channel >> add the new channel into the channel memory. Add/Delete >> Clear All >> Tune in the new channel. Press MENU. The menu screen will appear. : Select ENTER:Set Press EXIT to return to the normal screen. -
Page 17: Labeling Channels
RECALL NOTE: • If a channel with no broadcast is selected, the This button allows you to go back to the last channel sound will automatically be muted. selected by pressing RECALL. Press RECALL again • It may take a few seconds for a digital channel to return to the last channel you were watching. -
Page 18: Labeling Video Inputs
To register a password The characters rotation as follows: Press MENU. The menu screen will appear. , () @ / + = - Press to select “Lock”, then press SPACE ENTER. If the character which you desire appears, press Select and enter your password (4 digits) using ENTER. -
Page 19: Closed Caption
Movie Rating Press to select “V-Chip Set (DTV)”, then press or ENTER. Movie Rating If the TV is not storing the additional rating system, the TV will begin downloading it, which PG-13 may take some time to be completed. NC-17 Set your preferred content rating limits for the : Select ENTER:Set... -
Page 20: Cc Advanced
Press to select “Analog Caption” or Press to select “Closed Caption”, then “Digital Caption”. press or ENTER. The Closed Caption menu will appear. When you select “Analog Caption”, you can Press to select “Digital CC Preset”, choose C1, C2, C3, C4, T1, T2, T3 and T4. then press to select “Custom”. -
Page 21: Picture Control Adjustment
Mode Picture Quality Press to select “Picture Setting”, then press or ENTER. Sports Bright and dynamic picture (factory-set) The Picture Setting menu will appear. Standard Standard picture quality (factory-set) Movie Movie-like picture setting (factory-set) Press to select “Color Temperature”, then press to change the setting. -
Page 22: Film Mode
Film Mode Cinema Wide1 picture size (for 4:3 format programs) To fill the screen, the right and left edges are A smoother motion may be obtained by setting extended, the Film Mode to “On”. however; the center of the picture remains near its former ratio. -
Page 23: Dnr
Selecting Stereo/Second After adjusting, press ENTER to return to the PC Setting menu. Then continue to adjust the other Audio Program (SAP) items. Press EXIT to return to the normal screen. The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound. MTS also NOTE: can transmit a second audio program (SAP) •... -
Page 24: Adjusting The Back Lighting
Adjusting the back Press or ENTER to return your settings to the lighting factory settings. “Reset” will appear on the screen approx. 3 seconds, then it returns to the normal The Backlight feature adjusts the screen brightness for improved picture clarity. NOTE: •... -
Page 25: Reception Disturbances
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/ UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. -
Page 26: Troubleshooting
Troubleshooting Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS SYMPTOMS POSSIBLE SOLUTIONS Digital... -
Page 27: Specifications
Specifications Power supply: AC 120 V 60 Hz Power consumption: Operation: 55 W Stand by: 0.8 W Weight: 8.4 lbs (3.8 kg) Dimensions: Width: 19 inches (483 mm) Height: 15-25/64 inches (391 mm) Depth: 6-5/8 inches (169 mm) Inputs: VIDEO: 1 V (p-p)/75 ohms AUDIO: –8 dBm/50k ohms...