Table of Contents
Advertisement
Figure 1-3 illustrates the card numbers and logical addresses of a typical
multiple module switchbox. Figure 1-4 illustrates the card numbers of a
typical multiple module scanning voltmeter.
Figure 1-3. Card Numbers for a Multiple Module Switchbox
The logical addresses noted in Figures 1-2, 1-3, and 1-4 apply to modules
installed in an 75000 Series B Mainframe (Model Number E1300/E1301) or
in a mainframe with an E1405/E1406 Command Module. See the 75000
Series B Installation and Getting Started Guide or the E1406 Command
Module Manual for more information on switchboxes and scanning
voltmeter configurations, and logical addressing. If using the E1300
Mainframe or E1405 Command Module, you MUST have version 06.00
(or greater) firmware for the 16-Channel Multiplexer Modules to
properly identify. For uses in other systems or mainframes, see the
appropriate manuals.
Figure 1-4. Card Numbers for a Multiple Module Scanning Voltmeter
Chapter 1
Getting Started
15
Advertisement
Table of Contents
