Panel/Remote Lock Selection Mode; Displaying And Selecting Each Mode - Denon AVR-X2400H Service Manual

2. PANEL / REMOTE LOCK Selection Mode
2.1. Actions
Switch the PANEL LOCK and REMOTE LOCK modes between on and off.
2.2. Starting up
While holding down buttons "TUNER PRESET CH+" and "ZONE2 SOURCE" simultaneously, press the
power button to turn on the power.
Select the desired mode using the "TUNER PRESET CH+/-" button, then press the "STATUS" button to
confirm.

2.3. Displaying and Selecting Each Mode

The information shown on the display switches each time the "TUNER PRESET CH+" button is
pressed.
Press the "STATUS" button to set the currently displayed mode and restart the device.
The setting with " * " is selected for each mode.
q
FP/VOL LOCK*On
The buttons on the unit and the master volume knob does not function.
w
FP LOCK On
The buttons on the unit does not function.
e
FP LOCK Off
The PANEL LOCK mode is turned off.
r
RC LOCK On
The device cannot be operated by the remote control.
t
RC LOCK *Off
The REMOTE LOCK mode is turned off.
127