Refer To "Ordering Replacement Parts - Land Pride FDR3690 Operator's Manual

Section 4: Maintenance & Lubrication
Long Term Storage Instructions
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help ensure the unit is ready
for field use the next time you hook-up to it.
!
WARNING
To avoid serious injury or death:
Always shut tractor down using "Tractor Shutdown
Procedure" provided in this manual before servicing,
adjusting, cleaning, or maintaining this implement.
1. Clean off any dirt or grease that may have
accumulated on the deck and moving parts. Scrape
off compacted dirt from the bottom of the deck and
then wash the surface thoroughly with a garden hose.
A coating of oil may also be applied to the lower deck
area to minimize oxidation.
2. Check blades and blade bolts for wear and replace if
necessary. See "Blade Inspection" on page 20.
3. Inspect mower for loose, damaged, or worn parts
and adjust or replace as needed.
Repaint parts where paint is worn or scratched to prevent
rust. Ask your Land Pride dealer for aerosol touch-up
paint. They are also available in touch-up bottles with
brush, quarts, and gallon sizes by adding TU, QT, or GL
to the end of the aerosol part number.
Land Pride Touch-up Paint
Part No. Part Description
821-011C PAINT LP BEIGE SPRAY CAN
821-066C PAINT ORANGE SPRAY CAN
821-070C PAINT GP GLOSS BLACK SPRAY CAN
4. Replace all damaged or missing decals.
5. Lubricate as noted in the "Ordering Replacement
Parts" portion of this section starting on page 22.
6. Store mower on a level surface in a clean, dry place.
Inside storage will reduce maintenance and make for
a longer mower life.
7. Follow all unhooking instructions on page 18 when
disconnecting tractor from mower.
22
FDR3690 Rear Discharge Grooming Mower 310-447M
Table of Contents
Ordering Replacement Parts
Land Pride offers equipment in factory standard Beige
with black highlights. This implement is also available in
Orange.
When ordering an optional color, the suffix number
corresponding to the color must be added at the end of
the part number. Parts ordered without the suffix number
will be supplied in factory standard colors.
82 . . . . . . . Orange
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
85 . . . . . . . Black
11/7/18