Washing Clothes Manually; Using Delay Start - Samsung WF-B1056 User Manual

washing a load of laundry

WASHING CLOTHES MANUALLY

You can wash clothes manually without using the Fuzzy Logic feature.
To do so:
1. Turn the water supply on.
2. Press the Power button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent and, if necessary, softener or prewash detergent, in the appropriate
compartments.
7. Press the Temp. button to select the temperature.
(cold water, 30˚C, 40˚C, 60˚C, 95˚C)
8. Press the Rinse button to select the required number of rinse cycles.
Maximum number of rinse cycles is five.
The washing duration will be prolonged accordingly.
9. Press the Spin button to select the spin speed.
The rinse hold program allows you to take clothes that are dripping wet out of the washing
machine
No spin(
10. Press the Delay Start button repeatedly to cycle through the available delayed start options
(from 4 hours to 24 hours in one hour increments). Displayed hours means the time of
finished washing-cycle.
11. Press the Start/Pause button and the machine will begin the cycle.

USING DELAY START

You can set the washing machine to finish your wash automatically at a later time, choosing from 4 to 24
hours delay (in 1 hour increments). Displayed hours means the time of finished washing-cycle.
To do this:
1. Manually or automatically set your washing machine for the type of clothes you are washing.
2. Press the Delay Start button repeatedly until the delay time is set.
3. Press the Start/Pause button. The 'Delay Start' indicator will light, and the clock will begin
counting down until it reaches your finish time.
4. To cancel 'Delay Start', press the Power button, then turn the washing machine on again.
14_ Washing a load of laundry
WF-B1456GW-02176W_EN.indd 14
) - The laundry remains wet without spinning after final Rinse
2007-10-15 ¿ÀÈÄ 3:04:57