Washing For The First Time - Samsung WF-B1056 User Manual

washing a load of laundry
DELAY START
7
SELECTION
BUTTON
MEMORY BUTTON
8
FUZZY CONTROL
9
DIAL
START/PAUSE
10
SELECTION
BUTTON
POWER BUTTON
11

WASHING FOR THE FIRST TIME

Before washing clothes for the first time, you must run a complete cycle without clothes.
To do this:
1. Press the Power button.
2. Pour a little detergent into compartment( ) in the detergent
drawer.
3. Turn on the water supply to the washing machine.
4. Press the Temp. button repeatedly until 40 °C is displayed.
5. Press the Start/Pause button.
• This will remove any water from the manufacturer's test run
remaining in the machine.
Dispenser
Dispenser
Dispenser
12_ Washing a load of laundry
WF-B1456GW-02176W_EN.indd 12
Press the button repeatedly to cycle through the available delayed start
options (from 4 hours to 24 hours in one hour increments).
Displayed hours means the time of finished washing-cycle.
Press the button, select frequently used functions, press Start/Pause
button to save the settings automatically.
Turn the dial to select one of the 14 available wash programs.
Cotton, Coloureds, Synthetics, Delicates, Wool, Hand wash, Quick,
Rinse+Spin, Spin, Drain, Baby Cotton, Heavy Soil, Mixed Load, Calm Wash
Press to pause and restart programs.
Press the Start/Pause button before adding the laundry. This can only be
selected within 5 minutes of the start.
Press once to turn the washing machine on, press again to turn the
washing machine off.
If the washing machine power is left on for longer than 10 minutes without
any buttons being touched, the power automatically turns off.
: Detergent for prewash or starch.
: Detergent for main wash, water softener, pre-soaking agent, bleach and stain
removal product.
: Additives,e.g.fabric softener or former (fill no higher than lower edge of insert " A")
2007-10-15 ¿ÀÈÄ 3:04:56