Installing The Batteries - Samsung DJ68-00518A User Manual

Assembling the cleaner
NAME OF EACH PART
Charging Lamp
Charge Pin
Mode Lamp
Mode/Power Button
Distance Control

Installing the batteries

■
Batteries are not supplied with the product. You have to purchase the batteries additionally.
Install the alkaline batteries (type D) before use.
1
Lift the cover of the Smart
gate while pressing the
locking tab.
[ Charger (Station) ]
[ Smart gate ]
Switch
2
Install the batteries into
the Smart gate as shown
by the figure below. (If the
batteries are installed with
the incorrect polarity, the
Smart gate will not work.)
Power
Lamp
Distance Detection
Sensor
Main Body Detection
Sensor
3
After inserting the tip of
the cover into the slot,
push the other end to
close it until it clicks into
place.
✽ Specification: Alkaline Type D (LR20) batteries
Assembling the cleaner _17
Remote Control
Holder
Vents
Catching Sill