Related Manuals for Samsung VC-7616VN
Summary of Contents for Samsung VC-7616VN
-
Page 1: Operating Instructions
DJ68-00085S(0.0) 8/20/02 1:33 PM Page 1 Operating Instructions VACUUM CLEANER Before operating this unit, please read the instructions carefully. -
Page 2: Important Safeguards
DJ68-00085S(0.0) 8/20/02 1:33 PM Page 2 IMPORTANT SAFEGUARDS This appliance must be connected to the same mains voltage as shown on the rating plate. This vacuum cleaner is not suitable for removing any kind of liquid. Carpets treated with a liquid cleaner must be allowed to dry before being cleaned with the unit. -
Page 3: Identifications Of Parts
DJ68-00085S(0.0) 8/20/02 1:33 PM Page 3 IDENTIFICATIONS OF PARTS Features marked with * may vary according to model. ASSEMBLING THE VACUUM - CLEANER READY FOR USE 1) Connect the suction hose to the 2) Connect the cyclone filter to the suction tube. -
Page 4: Power Cord
DJ68-00085S(0.0) 8/20/02 1:33 PM Page 4 POWER CORD 1) PULLING OUT The power cord is long enough to be drawn out for convenience. 2) REWINDING When you have finished cleaning, disconnect the plug from the electri- cal outlet and simply press the cord rewind button lightly with your toe. - Page 5 DJ68-00085S(0.0) 8/20/02 1:33 PM Page 5 DUST-FULL INDICATOR If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. NOTE: If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged.
-
Page 6: Replacing The Dustbag
DJ68-00085S(0.0) 8/20/02 1:33 PM Page 6 CYCLONIC FILTER (ONLY CYCLONIC FILTER TYPES) You can use a dust bag in your cleaner for a long time thanks to the Cyclonic Filter system and it maintain the maximum cleaning efficiency. The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter. - Page 7 DJ68-00085S(0.0) 8/20/02 1:33 PM Page 7 3) After removing the used dust bag, 4) Press the dust cover down gently insert the cardboard bag collar of the until the clamper relocks. new dust bag into the carrying bag, and then insert it in its original position NOTE: Used dust bag can be sealed by removing the film from the paper and sticking the latter...
-
Page 8: Troubleshooting
DJ68-00085S(0.0) 8/20/02 1:33 PM Page 8 USAGE OF FLOOR NOZZLE FOR RUG / FLOOR SELECTOR Before use make sure that the position of the selector is in the right position for the type of surface to be cleaned. Select the carpet indicator when cleaning carpets.