Table of Contents
Advertisement
7
7
CHAPTER 7
Settings, preferences, upgrades, and extras
Setting the analog out preference
Depending on the particular program being broadcast, you can listen to stereo, mono,
or a Separate Audio Program. (SAP audio is usually a foreign-language translation.
Sometimes SAP has unrelated information like news or weather.)
To set the Analog Audio preference, follow these steps:
Press the MENU button on your remote control.
1
Highlight the Setup menu item, then press the SELECT button.
2
Highlight the Preferences menu item, then press the SELECT
3
button.
Highlight the Audio menu item, then press the SELECT button. The Audio menu appears.
4
The Analog Audio menu item is highlighted.
Press the SELECT button on your remote control to display the list of available audio format.
5
A list of audio format appears.
Highlight the audio format you wish to use, then press the SELECT button. A list appears from
6
which you can choose Mono, Stereo, or SAP. When you select an audio format, the list
disappears. Your selection is indicated in the Analog Audio line on the Audio menu.
Guide to MTS Settings
Choose Stereo for channels that are broadcasting in stereo.
Choose Mono for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal.
Choose SAP to listen to the Separate Audio Program, which is usually a foreign-language translation.
Advertisement
Table of Contents
