Table of Contents
Advertisement
3
3
CHAPTER 3
Setting up and connecting
To set up the Local Networks menu option:
Press the MENU button on your remote control.
1
Highlight Setup, and press the SELECT button.
2
Highlight Installation, and press the SELECT button.
3
Highlight Local Networks, and press the SELECT button.
4
Highlight Primary Air, and press the SELECT button.
5
Highlight the first box in the ZIP code area, then use the
6
number buttons on your remote control to enter your ZIP code.
After a while, a list of cities appears below your ZIP code.
Highlight the name of the city from which your local channels
7
are broadcast, and press the SELECT button.
Highlight the on-screen BACK button, and press the SELECT
8
button. You return to the Local Networks screen.
(Optional) If you receive off-air broadcasts from a second city, highlight Secondary Air, and
9
press the SELECT button. Repeat steps 6 - 8 for the second city.
(Optional) If you receive programming from a cable TV service, highlight Cable, and press
10
the SELECT button. Repeat steps 6 - 8 for the cable service.
When you have finished entering your local broadcast and cable TV information, press the
11
EXIT button on your remote control. The DIRECTV
and then back on). After rebooting, the DIRECTV
Guide information for your local off-air and cable TV channels.
®
HD Receiver will reboot (turn itself off
HD Receiver will acquire and provide
®
Advertisement
Table of Contents
