Samsung DIRECTV SIR-TS160 Owner's Manual page 89

Chapter 7: Settings, preferences, upgrades, and extras
To set the Default Audio preference, follow these steps:
1
Press the MENU button on your remote control.
2
Highlight the Setup menu item, then press the OK button.
3
Highlight the Preferences menu item, the press the OK button.
4
Highlight the Audio menu item, then press the OK button.
The Audio menu appears. The Default Audio menu item is highlighted.
5
Press the OK button on your remote control to display the list of available
languages.
A list of languages appears.
6
Highlight the language you wish to
use for digital audio broadcasts,
then press the OK button.
When you select a language, the
Language list disappears. Your
selection is indicated in the Default
Audio line on the Audio menu.
Setting the Digital Audio format
If you are using the optical digital audio out jack to connect your DIRECTV
Definition Receiver to a digital audio receiver, you should use this preference setting
to tell your DIRECTV HD Receiver whether your audio receiver processes PCM
digital audio signals or Dolby Digital audio signals. See the manual for your audio
receiver if you are not sure.
To set the Digital Audio preference, follow these steps:
1
Press the MENU button on your remote control.
2
Highlight the Setup menu item, then press the OK button.
3
Highlight the Preferences menu item, then press the OK button.
4
Highlight the Audio menu item, then press the OK button.
The Audio menu appears.
®
High-
82