Samsung DIRECTV SIR-TS160 Owner's Manual page 36

Chapter 3: Setting up and connecting
The Installation option in the SETUP menu provides access to a variety of important
setup controls. The first of these is the Set Dish menu. The Set Dish menu allows
you to:
Acquire the exact azimuth, elevation, and tilt angles to help you point your dish
•
accurately based on your ZIP code.
Check the setup of your satellite dish using an on-screen signal meter.
•
Set the dish type (to tell your DIRECTV
•
satellite dish you are using).
Set your dish type automatically.
•
The sections that follow detail each of these procedures.
Acquiring the correct dish pointing angles
The Dish Pointing menu item in the Set Dish menu allows you to find out exactly
how to point your satellite dish by entering your ZIP code. If you have not yet
successfully aligned your satellite dish, or if you need to realign it, follow these
instructions to find the exact angles you should use to point your dish:
1
Press the MENU button on your remote control.
The Main menu appears.
2
Highlight the SETUP menu item, then press the OK button.
The SETUP menu appears.
3
Highlight the Installation menu item, then press the OK button.
The Installation menu appears.
4
Highlight the Set Dish menu item, then press the OK button.
The Set Dish menu appears.
5
Highlight the Dish Pointing menu
item, then press the OK button.
The Dish Pointing screen appears.
6
Use the right-arrow button on your
remote control to highlight the
space for the first digit in the ZIP
code.
29
®
High-Definition Receiver what kind of