Table of Contents
Advertisement
u440 BMC Guide.book Page 35 Wednesday, October 8, 2008 10:17 AM
To send a text or picture message using Voice Dial:
1. Activate voice recognition by pressing and holding
phone prompts you for a command.)
2. Say Send Text or Send Picture. (The phone prompts you to say the
number or Contact name.)
3. Say either a name stored in your Contacts or a valid 7, 10, or 11 digit
North American phone number naturally and clearly.
4. If the phone asks you, "Did You Say", followed by the correct number,
say Yes. (You can also select the correct number from those displayed
on the screen by pressing
5. Follow the prompts to enter text (see "Text Messaging" on page 42) or
attach a picture (see "Picture Message" on page 44).
Using Name Lookup
Name Lookup lets you retrieve contact information for any person in your Contacts
by saying the full name of the person.
To retrieve information using Name Lookup:
1. Activate voice recognition by pressing and holding
will prompt you for a command.)
2. Say Lookup. (The phone will prompt you to say the name.)
3. Say the full name of the person, exactly as it is entered in your Contacts.
(The phone will play the name it recognized through the speaker, and
then open the contact information for that name.)
•
If the phone says, "Did You Say", followed by an incorrect name, say
No. The phone then prompts you with the next name, if there is one. If
there are no more names, the phone will say "Sorry, No Match
Found".
Using Go To
The Go To option lets you activate a menu item, such as Messaging, on your phone
by saying the name.
To go to a menu using Voice Dial:
1. Activate voice recognition by pressing and holding
prompts you for a command.)
2. Say Go To. (The phone prompts you to say the menu.)
MENU
on the correct number. )
OK
. (The
. (The phone
. (The phone
Voice Service 35
Advertisement
Table of Contents
