Table of Contents
Advertisement
u440 BMC Guide.book Page 95 Wednesday, October 8, 2008 10:17 AM
7. Press
MENU
to save and exit.
OK
Alerts
Your phone can alert you with an audible tone when you change service areas,
once a minute during a voice call, or when a call has been connected.
The different actions available are:
•
Minute Beep: An alert tone is sounded every minute that you are
connected.
•
Service: An alert tone is sounded when you come in or out of your
coverage area.
•
Connect: An alert tone is sounded when you are initially connected.
•
Sig Fade Tone: An alert tone is sounded when the signal fades and the
connection is lost. An alert tone is also sounded when your phone partially
loses signal due to network conditions.
•
Power On/Off: An alert tone is sounded when your phone is powered On or
Off.
To enable or disable alert sounds:
MENU
1. Press
for Menu.
OK
2. Select Settings > Sounds.
3. Select Alerts.
4. Select Minute Beep, Service, Connect, Sig Fade Tone, Power On, or
Power Off.
5. Select On or Off using the navigation key and press
exit.
Key Tone
Your phone offers a number of options for selecting the audible tones
accompanying a key press.
There are three different tones available:
•
Xylophone: Musical polyphonic tones are heard when a key is pressed.
•
DTMF: Dual tone, multi-frequency beeps are heard when a key is pressed.
•
Voice: Polyphonic beep tones are heard when you press a key.
To select a key tone:
1. Press
MENU
for Menu.
OK
2. Select Settings > Sounds.
MENU
to save and
OK
Settings 95
Advertisement
Table of Contents
