Setting Up - Sony DTP-T1000 A Instruction Manual

Setting up

Setup
These options allow the user to modify settings,
update the software and shut down the unit.
Administrator Change the administrator
password password
User password Change the user password
Date & time Configure the time and time
zone
Shutdown Reboot/Shutdown
Network Configure the necessary
network settings
Access control Configure dsnet access
control
Reset of setting Initialize the selected
settings
Save & load Save settings, and
synchronize the saved
settings with this unit
Update Update the system
Restart of dsnetm Restart programs
communicating with the
host PC
Self-diagnostic Conduct a variety of tests
program
Show status
The following unit settings can be displayed.
Network Verify the network settings
Softwave version Verify the version numbers
of installed software
packages
Access control Display dsnet access
control settings
Online help
You can view the Help for the Administration
Tool.
Setting up
Click on the items to the right of "Setup" to
configure each setup.
Administrator password
Upon clicking "Administrator password", the
following screen is displayed. This screen is
utilized to change the password used for
administrator authentication.
Enter the desired password in the "Password" and
"Retype Password" fields. Click "Setting" to
complete the configuration.
Caution
• For security purposes, be sure to change the default
password.
• The password must be a combination of both letters and
numeric characters. Passwords consisting of all lowercase,
all uppercase or all numeric characters are not allowed.
• A password may be seven or eight characters long.
Passwords fewer than seven characters long are not allowed.
Also, if nine or more characters are entered, only the first
eight characters are set as the password.
• If an error is made in entering the password, or the values
entered into the "Password" and "Retype password" fields
do not match, an error message is displayed. If this occurs,
enter the password again.
19
Setting up