Using A Speakerphone; New Call - Samsung OfficeServ ITP-5107S User Manual

Using a Speakerphone

This function is used when you make a call with a speakerphone.
1
Press the [Speaker] button without lifting the
handset.
2
Dial the telephone number you want to call.
Or, press the trunk line call/extension call button
registered.
3
Once the called party answers the call, get
started with speaking to the called party.
- Lift the handset while speaking to turn off the speaker
and continue speaking using the handset.
4
Finish the call, by pressing the [Speaker] button.
If the LCR(Least Cost Routing) feature is enabled on the OS 7200 system, press the
[LCR] button or press the LCR access code.

New Call

This function allows you to disconnect the existing call and make a new call on the
same line.
1
Press the [NEW] button to disconnect your
existing call, wait for dial tone and then make a
new call on the same line. If this [NEW] button
does not appear on your phone, press the Soft
button corresponding to [NEW] on the LCD
screen.
ITP-5121D/ITP-5114D/ITP-5107S IP phone User Guide
© SAMSUNG Electronics Co., Ltd.
23