Advertisement
DP18 Series
OPTION R1 : AL1 AS A HIGH SETPOINT (MAX.)
OPTION R2 : AL1 AS A HIGH SETPOINT (MAX.)
SELECT THE DESIRED CONFIGURATION FROM THE CHARTS BELOW, THEN INSTALL THE PUSH-ON JUMPERS INDICATED ON THE SELECTORS
S1, S2, S3, S4 AND S5.
IF A DECIMAL POINT IS REQUIRED, REFER TO THE APPROPIATE MAIN ASSEMBLY DATA SHEET FOR LOCATION AND CONFIGURATION
PROCEDURE.
SELECTOR S2
RELAYS OPERATING DELAY.
AL 1
CLOSE
S2-D
S2-C
S2-F
S2-G
* STANDARD TIME
SELECTOR S1
RANGE ACTUATION AND SETPOINT DISPLAY
RANGE
POSITIVE
ACTUATION
NEGATIVE
SETPOINT
1.000
DISPLAY
1.999
OMEGA warrants this unit to be free of defects in materials and workmanship and to give
satisfactory service for a period of 13 months from date of purchase.OMEGA Warranty adds an
additional one (1) month grace period to the normal one (1) year product warranty to cover
handling and shipping time. This ensures that OMEGA's customers receive maximum coverage
on each product. If the unit should malfunction, it must be returned to the factory for evaluation.
OMEGA's Customer Service Department will issue an Authorized Return (AR) number imme-
diately upon phone or written request. Upon examination by OMEGA, if the unit is found to be
defective it will be repaired or replaced at no charge. However, this WARRANTY is VOID if the
unit shows evidence of having been tampered with or shows evidence of being damaged as a result
of excessive corrosion; or current; heat; moisture or vibration; improper specification;
misapplication; misuse or other operating conditions outside of OMEGA's control. Components
which wear or which are damaged by misuse are not warranted. These include contact points,
fuses and triacs.
.
OMEGA is glad to offer suggestions on the use of its various products.
Nevertheless, OMEGA only warrants that the parts manufactured by it will be as
specified and free of defects.
OMEGA MAKES NO OTHER WARRANTIES OR REPRESENTATIONS OF ANY
KIND WHATSOEVER, EXPRESSED OR IMPLIED, EXCEPT THAT OF TITLE AND
ALL IMPLIED WARRANTIES INCLUDING ANY WARRANTY OF MERCHANT-
ABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY DIS-
CLAIMED.
LIMITATION OF LIABILITY: The remedies of purchaser set forth herein are
exclusive and the total liability of OMEGA with respect to this order, whether
based on contract, warranty, negligence, indemnification, strict liability or
otherwise, shall not exceed the purchase price of the component upon which
liability is based. In no even shall OMEGA be liable for consequential, incidental
or special damages.
Every precaution for accuracy has been taken in the preparation of this manual; however OMEGA
ENGINEERING, INC. neither assumes responsibility for any omissions or errors that may appear
nor assumes liability for any damages that result from the use of the products in accordance with
the information contained in the manual.
SPECIAL CONDITION: Should this equipment be used in or with any nuclear installation or
activity, purchaser will indemnify OMEGA and hold OMEGA harmless from any liability or
damage whatsoever arising out of the use of the equipment in such a manner.
Options R1 / R2 Single & Dual Setpoint Options
STANDARD FEATURES
FACTORY SET-UP SELECTION
AL2 AS A LOW SETPOINT (MIN.)
INTERNAL JUMPERS PROGRAMMING
CLOSE
AL 2
RELAY
CLOSE
IN SC.
S2-B
0.2
*
S2-H
0.4
S2-A
0.8
S2-C
1.6
AL 1
AL 2
S1-B
S1-G
S1-A
S1-E
S1-D
S1-H
S1-C
S1-F
WARRANTY
AL 1
AL 2
OPERATING
CLOSE
FORM
S3-D
S3-A
MINIMUM (LO)
S3-C
S3-B
MAXIMUM (HI)
C
D
A
E
F
B
G
H
A
B
C D
E
G
F
H
SELECTOR S4
Servicing USA and Canada: Call OMEGA Toll Free
Servicing Europe: United Kingdom Sales and Distribution
Direct all warranty and repair requests/inquiries to the OMEGA ENGINEERING Customer
Service Department. BEFORE RETURNING ANY PRODUCT(S) TO OMEGA, PURCHASER
MUST OBTAIN AN AUTHORIZED RETURN (AR) NUMBER FROM OMEGA'S CUSTOMER
SERVICE DEPARTMENT (IN ORDER TO AVOID PROCESSING DELAYS). The assigned AR
number should then be marked on the outside of the return package and on any correspondence.
FOR WARRANTY RETURNS, please have
the following information available BEFORE
contacting OMEGA:
1. P.O. number under which the product was
PURCHASED.
2. Model and serial number of the product
under warranty, and
3. Repair instructions and/or specific prob-
lems relative to the product.
OMEGA's policy is to make running changes, not model changes, whenever an improvement is
possible. This affords our customers the latest in technology and engineering.
OMEGA is a registered trademark of OMEGA ENGINEERING, INC.
© Copyright 1994 OMEGA ENGINEERING, INC. All rights reserved. This documentation may not
be copied, photocopied, reproduced, translated, or reduced to any electronic medium or machine-
readable form, in whole or in part, without prior written consent of OMEGA ENGINEERING, INC.
DEADBAND . . . . . . . . . . . 1 to 10 COUNTS
RELAYS DELAY . . . . . . . 0.2 sc.
SETPOINT DISPLAY . . . . 0 to 1999 COUNTS
RANGE ACTUATION . . . . POSITIVE
SELECTOR S3
A
C
OPERATING FORM
B
D
SELECTOR
S3
SELECTOR
SETPOINTS BOARD
S2
COMPONENTS VIEW
SELECTORS S4-S5
DEADBAND RANGE
FOR
FOR
AL 1
AL 2
S5 OPENED
S4 OPENED
S5 CLOSED
S4 CLOSED
A n O M E G A Te c h n o l o g i e s C o m p a n y
USA
One Omega Drive, Box 4047 976 Bergar
Stamford, CT 06907-0047
Telephone: (203) 359-1660
FAX: (203) 359-7700
Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA
Customer Service: 1-800-622-2378 / 1-800-622-BEST
Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN
TELEX: 996404 EASYLINK: 62968934 CABLE: OMEGA
Center
25 Swannington Road, Broughton Astley, Leicestershire
LE9 6TU, England
Telephone: 44 (1455) 285520 FAX: 44 (1455) 283912
RETURN REQUESTS / INQUIRIES
FOR NON-WARRANTY REPAIRS OR
CALIBRATION, consult OMEGA for current
repair/calibration charges. Have the following
information available BEFORE contacting
OMEGA:
1. P.O. number to cover the COST of the
2. Model and serial number of product, and
3. Repair instructions and/or specific
M2119/1294
relay
relay
SELECTOR S1
SELECTOR S5
DEADBAND
REGULATION
1 to 10 COUNTS
3 to 50 COUNTS
Canada
Laval (Quebec) H7L 5A1
Telephone: (514) 856-6928
FAX: (514) 856-6886
SM
SM
SM
repair/calibration.
problems relative to the product.
Advertisement
