Timer Function; Cancelling The Timer - Samsung AH68-00939B Instruction Manual

Timer Function

The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock until TIMER is displayed.
3
Press Return/Enter.
Result: ON TIME is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
4
Set the timer switch-on time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Return/Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press Return/Enter.
Result: OFF TIME is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
5
Set the timer switch-off time.
a Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Return/Enter.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d Press Return/Enter.
Result: VOL XX is displayed, where XX corresponds to the
volume already set.
6
Press Tuning Down and Up to adjust the volume level and press
Return/Enter.
Result: The source to be selected is displayed.
7
Turn the Multi Jog knob to select the source to be played when the
system switches on.
If you select...
TAPE (cassette)
TUNER (radio)
CD (compact disc)
8
Press Return/Enter to confirm the timer.
9
Press On/Standby to set the system to standby mode.
Result: is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
You must also...
Insert a recorded cassette in one of
the decks before setting the
system to standby.
a Press Return/Enter.
b Select the FM or AM frequency
band by tuning the Multi Jog
knob to the right or to the left.
c Press Return/Enter.
d Select a preset station by tuning
the Multi Jog knob to the right or
to the left.
a Load one or more compact discs.
b Select the required disc.
If the timer switch on and off times are identical, the word ERROR is
displayed.
On/Standby
Demo
AI Sleep
1,9
Timer
On/Off
Timer
/Clock
2
Echo
Preset/
Mono/ST Memory
MIC Mixing
Deck 1/2 REV.Mode
MIN MAX
MIC 1
6 6
REC/Pause
MIC 2
PREV. Next
PREV. Next
Down Down Up
Up
Tuning Mode
To set the timer function
You may use Multi Jog or
5, 6, 7.

Cancelling the Timer

After having set the timer, it will start automatically as shown
by the TIMER indication on the display. If you no longer wish
to use the timer, you must cancel it.
You can stop the timer at any time (system on or in standby mode).
To...
Cancel the timer
Restart the timer
On/Standby
1 2
4 5
7 8
Band +10/0 Mono/ST.
Timer
AI Sleep
On/Off
Volume
+
_
CD
Program Repeat
TUNER VCD/CD
Band
D / P / S
DIRECT PLAY & SELECTION
Shuffle
TAPE
AUX 3,4,5,6,7,8
Return/Enter
4,5,7
Dubbing
CD
Synchro Normal
HI - Speed
CD–R/RW PLAYBACK
/ buttons to adjust in step 4,
Press Timer On/Off...
Once.
Result: is no longer displayed.
Twice.
Result: is displayed again.
Mute Disc Skip
3
CD Repeat Return
6 Time Disc
Search View
9
Sound Slow
Key Control
b #
Zoom
Counter
Deck 1/2
Reset
TAPE
VCD / CD
23
GB