Where To Install Your Mini-Compact System; Connecting Your System To The Power Supply - Samsung AH68-00939B Instruction Manual

Where to Install Your
Mini-Compact System
To take full advantage of your new mini-compact system, fol-
low these installation instructions before connecting the unit.
Install the system on a flat, stable surface.
Never place this unit on carpeting.
Never place this unit in an outdoor area.
Maintain an open space of approximately 6 inches (15 cm) on the
sides and rear of the system, for ventilation purposes.
Make sure that you have enough room to open the compact disc
compartment easily.
Place the loudspeakers at a reasonable distance on either side of
the system to ensure good stereo sound.
Direct the loudspeakers towards the listening area.
For optimum performance, make sure that both speakers are placed
at an equal distance above the floor.
-- Disc Selection / Direct Play --
Disc 1
On/Standby
Demo
AI Sleep
Timer
On/Off
Timer
/Clock
Echo Preset/
Mono/ST Memory
MIC Mixing
Deck 1/2 REV.Mode
MIN MAX
MIC 1
REC/Pause
MIC 2
PREV. Next
Down
Up
Tuning Mode
Disc 2 Disc 3
Disc Change
Volume
+
_
Power
Surround
CD
Program Repeat
TUNER VCD/CD
Band
S.BASS
D / P / S
DIRECT PLAY & SELECTION
Shuffle
E Q
TAPE
AUX
Return/Enter
D.S.P
CD Dubbing
Synchro Normal HI - Speed
Phones
CD–R/RW PLAYBACK
Connecting your System to the
Power Supply
The main lead must be plugged into an appropriate socket.
Before plugging your system into a main socket, you must check
the voltage setting (OPTIONAL). If the voltage of the socket does
not correspond to the setting on the rear of the unit, you may
seriously damage your system.
1
Check the position of the Voltage selector on the rear of the system
(OPTIONAL).
2
Plug the main lead (marked AC Cord on the rear of the system) into
an appropriate socket.
3
Press the On/Standby button to switch your mini-compact system on.
R L R
R
AUX IN
VOLTAGE
SELECTOR
VIDEO OUT
AUDIO OUT
R
7
GB