Download Print this page

Radio Shack MPS-50 Owner's Manual page 2

50 watt speaker/amplifier

Advertisement

32-2046.fm Page 2 Monday, January 24, 2000 12:33 PM
FEATURES
Your RadioShack MPS-50 50 Watt
Speaker/Amplifier is designed for use
with sound sources such as an electric
guitar, keyboard, or microphone. The
MPS-50 is portable, requiring only a flat
surface for setup, so you can use it to
practice or entertain at parties and get-
togethers. Its full range 12-inch speaker
provides 50 watts RMS for optimum
sound quality.
Your MPS-50 has these features:
Dual
/
-Inch (6.35 mm) High and Low
1
4
Input Jacks — let you connect two key-
boards, guitars, or high impedance mi-
crophones and two low impedance
(200–600 ohm) microphones.
Dual Gain, Bass, and Treble Con-
trols — let you balance gain levels be-
tween the two channels and adjust the
low and high frequency response on
each channel.
Dual Reverb Switches — let you add
reverberation to either or both channels
to compensate for environmental condi-
tions or to suit your personal preference.
Reverb Level Control — lets you con-
trol the amount of overall reverb.
Distortion Control — lets you select a
clean sound or add the desired amount
of distortion to match your musical style.
RadioShack is a registered trademark used by Tandy Corporation.
2
Master Volume — lets you control the
MPS-50's overall output level.
Power On Indicator — lights to show
the MPS-50 is on.
Phones Jack — lets you connect a
mono headphone for private listening.
Line Out Jack — lets you connect a
power amplifier or mixer.
Send and Return Jacks — let you con-
nect a sound effect device (such as an
echo reverb or digital sampler proces-
sor).
Reverb Remote Jack — lets you con-
nect a foot switch to control reverb ef-
fects.
©
1999 Tandy Corporation.
All Rights Reserved.

Advertisement

loading

This manual is also suitable for:

32-2046