Follett 7UC100A Service Manual page 8

5. Connect water line. Recommended routing (Fig. 3) allows easy access
to water for cleaning and sanitizing procedure.
6. If installing the optional internal water filter*, please complete the
Cleaning and Sanitizing Procedure on page 11
steps shown in
before proceeding. If not, proceed to step 10.
* If your dispenser has the internal water filter option, the water filter must be
installed for the dispenser to operate. Because internal components will need to
be accessed for both procedures, Follett recommends installing the water filter
just prior to initial sanitizing.
7. Lift and remove the top panel, set aside (Fig. 4.1).
8. Remove two screws (Fig. 4.2) and remove left side panel.
9. Install filter as shown. Turn filter clockwise until it is fully seated
(Fig. 4.3).
10. Connect power supply.
11. Sanitize the dispenser prior to use (see
Procedure on page
8 Undercounter Dispenser and Ice Machine 7UC100A/7UD100A
Cleaning and Sanitizing
11).
Fig. 3
3' (91.4 cm)
Plug
Valve
1/4" MPT
Fig. 4
1
2
3