Overview; Part Names And Functions - Samsung C4303(P) Owner's Instructions Manual

1

Overview

This camera is a high performance surveillance camera that
provides a maximum of 220x zoom surveillance capability
with its 22x optical zoom lens and digital zoom IC.
It is a multifunction camera that is equipped with all of the
key features of the existing surveillance cameras :
G Day & Night function (SCC-C4203(P), C4303(P)) that
ensures sharp and clear images even at night.
G Low - Light Surveillance function that enables image
capture even under extremely low light conditions.
G White Balance function that provides accurate color
rendition under any light conditions.
G
BLC function that enables effective back light
compensation even under a spotlight or a very bright
incident light.
G
Auto Focus function that automatically tracks and focuses
on the moving subject.
G
RS485/ Wired remote control function.
Broadcast System
G
SCC-C4201/ C4203/ C4301/ C4303 : NTSC System
G
SCC-C4201P/ C4203P/ C4301P/ C4303P : PAL System
Power System/Power Consumption
G
SCC-C4201(P), C4203(P) : DC 12V/5.0W
G
SCC-C4301(P), C4303(P) : AC 24V, DC 12V/5.5W
* The followings may occur in a camera with built-in zoom.
- When the zoom rate becomes closer to the TELE side,
the edges of the screen may become dim.
- When connected to a DVR or an LCD monitor, the screen
corners may be obstructed.
5
2

Part Names and Functions

SET-UP button
REMOTE RS-485 POWER
SET-UP button
The function of the SET-UP button varies depending on
whether you are currently in Normal Operation mode (i.e.,
the Setup Menu is not displayed) or Setup Menu mode.
In Normal Operation Mode
- UP/ DOWN buttons : Use as the ZOOM Tele button
and the ZOOM Wide button respectively.
- LEFT/ RIGHT buttons : Use as the FOCUS Near
button and the FOCUS Far button respectively.
- SET- UP button: Use to enter the Setup Menu.
Hold the SET- UP button for longer than 3 seconds to
enter the Setup Menu.
Instead of "POWER", "DC IN"
is writtern in
SCC-C4201(P)/4203(P).
Instead of "POWER", "PWR
IN" and instead of "GND",
"DC12&AC24V" is writtern in
SCC-C4301(P)/4303(P).
6
E