Sony MDR-1ADAC Help Manual page 94

Help Guide
Troubleshooting
Stereo Headphones
MDR-1ADAC
Back Back to Top
Noise is generated.
Connect the headphones and the device directly, not via a USB hub or USB cable extension.
The USB port of the connected computer may have a problem. Connect the headphones to another USB port of the
computer if available.
When the audio device is connected to the Input jack (stereo mini) of the headphones, adjust the volume of the
connected device and turn up the volume of the headphones.
Keep the computer away from the headphones.
Restart the audio playback software.
Turn off the connected audio device then turn it on again.
Noise might occur between the songs because the headphones reproduce an original source authentically with high
sound quality. This is not a malfunction.
4-547-764-11(1)
Copyright 2014 Sony Corporation
Print
Go to Page Top
89