Sony MDR-1ADAC Help Manual page 72

Stereo headphones
Hide thumbs Also See for MDR-1ADAC:
Table of Contents

Advertisement

iPad Air
iPad mini with Retina display
iPad (4th generation)
iPad mini
iPod touch (5th generation)
iPod nano (7th generation)
Note
If noise is generated, turn off the connected iPhone/iPad/iPod, then turn it on again.
The headphones only support the audio playback function of an iPhone/iPad/iPod.
You cannot transfer music to your iPhone/iPad/iPod from the headphones.
Do not connect an iPhone/iPad/iPod that is not supported. The headphones are not guaranteed to work with an
unsupported iPhone/iPad/iPod.
If you connect an iPhone/iPad/iPod that is not equipped with the Lightning connector, see "Connecting to an analog
output device."
Some operations may not be possible with the headphones, even if you use a supported iPhone/iPad/iPod model.
Depending on the versions of the software of iPhone/iPad/iPod, operations may not possible even if the
headphones are connected with the iPhone/iPad/iPod.
Sony is not liable for damage/erasure of recorded data caused using an iPhone/iPad/iPod with the headphones.
Do not disconnect the iPhone/iPad/iPod while operating. Before disconnecting the iPhone/iPad/iPod from the
headphones, stop playback and turn the headphones off to prevent damage to data.
If the sound is distorted, set the equalizer to "Off" or "Flat" on your iPhone/iPad/iPod.
Turn on your iPhone/iPod touch before connecting it to the headphones.
Depending on an iPhone/iPad/iPod, the sound may become loud suddenly when you adjust the volume.
If the battery level of an iPhone/iPad/iPod is too low, charge it before use.
Music volume may vary depending on the ring tone of the iPhone and its application. Refer to the operation manual
of your iPhone.
If the iPhone is set to silent mode, the ring tone may not be heard from the headphones.
For details on operating an iPhone/iPad/iPod, refer to its operation manual.
An iPhone/iPad/iPod will not be charged when it is connected to the headphones.
Related Topic
Connecting to an analog output device
Compatible iPhone/iPad/iPod models
Go to Page Top
Go to Page Top
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents