Sony MDR-1ADAC Help Manual page 74

Help Guide
How to Use
Stereo Headphones
MDR-1ADAC
Back Back to Top
Listening to music with the headphones
You can listen to music from an audio device connected to the headphones by turning them on. When you connect the
headphones with an audio device using the headphone cable (supplied), there is no need to turn on the headphones. If
the battery is empty or being charged, the headphones can be used by connecting the headphone cable to audio
devices.
1. Connect an audio device to the headphones.
2. Press and hold the POWER button for about 2 seconds to turn on the headphones.
The POWER indicator lights up in green after it flashes.
The headphones do not turn on while the headphone cable is connected.
When you listen to music from an audio device connected with the headphone cable, there is no need to turn
on the headphones.
3. Wear the headphones
Extend the headband to adjust the length. Put the headphones with the
indication on your right ear then place the headset over your head. The
indication on your left ear and the
side has a tactile dot.
Print
69