Table of Contents
Advertisement
I
Receiving Data or Fax Calls - Single number
If you have a SIM card that does not support separate voice, data and
fax numbers, the phone does not recognize the type of incoming call.
To use a data or a fax service, make sure that you want to receive a
data or fax call mode. You first have to set the phone to one of these
options in the call mode (Settings ➝ call setting ➝ call mode) sub menu.
To receive a data or fax call
•
1. Press
2. Select the Settings ➝ call setting ➝ call mode.
3. Select the call type you want (Rx data or Rx fax) and press
[OK].
4. Connect your computer to the phone.
5. After starting the communicate software, accept a call and receive
a data or fax (if it is not answered automatically).
6. After the data or fax reception, you can end the call by just ending
of the communicate software, pressing END or by closing the flip.
The voice memo feature you to record up to 3 voice messages and
each memo is up to 30 seconds. This is useful when you don't have a
pen and paper to hand for taking directions or a message.
[Menu] in a standby mode.
Additional Functions
69
Advertisement
Table of Contents
