Table of Contents
Advertisement
Internet(WWW) [Menu 9]
Gateway setting* [Menu 9-3-2-5]
•
Most WAP gateways do not require a User ID and Password. If your
gateway does t hen these should be provided by your network, and
must be set up before attempting to browse WAP sites.
Bearer* [Menu 9-3-2-6]
•
You must select the bearer service provided by your WAP gateway
which will be either Data or SMS or GPRS.
Data/SMS/GPRS setting [Menu 9-3-2-7]
•
- Data setting
IP Address*
Dial Number*
Data Call Type* : You need to select the type of data call to make,
Data Call Speed : This is the speed of your data connection and
UserID*
Password*
64
: The service settings below are only available
when Data has been selected as a bearer
service.
: You must enter the IP address of the WAP
gateway you are using to access WAP pages.
This information should be supplied by your
network
: You need to enter the telephone number to dial
to access your WAP gateway. This information
should be supplied by your network.
that is: analogue or ISDN (digital). This
information should be supplied by your network.
should be provided by your network. This setting
is optional.
: This is your user identity for your dial-up server
(and NOT the WAP gateway). This should be
provided by your network
: This is the password required by your dial-up
server (and NOT the WAP gateway) to identify
you. This should be provided by your network.
Accessing the Menu
Advertisement
Table of Contents
