Turning The Astro 220 On; Charging The Dc 30 - Garmin Astro 220 Owner's Manual

Getting Started

Turning the Astro 220 on

To turn the Astro 220 on, press and hold the POWER
key.
The first time you turn the Astro 220 on, a message
appears followed by a prompt. Thereafter, when the
Astro 220 is turned on, the Garmin Logo appears,
followed by the Dog Tracker page.
Garmin Logo
To adjust the backlight level:
1. Press and quickly release the POWER key.

Dog Tracker Page
2. Press the POWER key or press the ROCKER up
arrow or down arrow to adjust the brightness levels.
3. Press ENTER to select a brightness level.
See page 44 to change the display colors and backlight
time out.

Charging the DC 30

Fully charge the DC 30 before using it on a hunt.
To charge the DC 30:
1. Connect the vehicle power cable or the AC adapter to
an appropriate electrical source.
2. Slide the connector into the slot on the side of the
DC 30.
3. Charge the DC 30 until the blue LED on the top of the
unit turns off.
NOTE: Charging a fully-depleted DC 30 battery requires
4½ hours.
Astro Dog Tracking System Owner's Manual