ADJusting tHe FReezeR DRAweR LeVeL
1. Locate the height-adjuster (
Unscrew the four Phillips screws (
2. Loosen the controller screw(
screwdriver.
3. Find the best level to align the door slope.
After adjustment, tighten the screws (
Adjustment part
) in the freezer drawer.
1
) slightly to loosen the door.
1
) with a Phillips
Example) The slope is about 2mm (0.08inch) as shown below.
- Rotate the Height Adjuster to +2.0 to reduce the door
)&(
) in reverse order.
Slope
Reference
plane
slope.
Freezer Drawer
Setting Up _1