Ip Address Setting (Touch Screen Controller Only) - Toshiba BMS-CT5121E Owner's Manual

TOUCH SCREEN CONTROLLER for Air Conditioning Control System
▼ Limiting operations and clearing limits on operations on the control screen
When operation limits are set, the [Unlock/Lock] button
clears the limits on operations.
<1> <1>
<1>
(1) The [Lock] button
<1>
(2) Tap the [Lock] button
It becomes impossible to do the operations at the level set in the password setting screen. (Refer to the menu icon display
(3) Tap the [Unlock] button
The Password input screen appears. Enter the password that was set and tap the [OK] button.
The [Unlock] button becomes the [Lock] button, and operation limits are released. However, note that if the wrong
password is input three times, the password cannot be entered again for 30 minutes.

[2-8] IP Address Setting (TOUCH SCREEN CONTROLLER only)

This is used to set the TOUCH SCREEN CONTROLLER IP address. The controller is restarted if the settings are changed.
The default settings are as follows.
• IP address: 192.168.2.80
• Subnet mask: 255.255.255.0
• Default gateway: 0.0.0.0 (not set)
(1) Tap the address that you wish to change
<2>
(2) Enter the new value
<3>
(3) Tap the [OK] button
A confirmation screen appears.
(4) Tap the [OK] button. The TOUCH SCREEN CONTROLLER restarts, and the new IP address is set.
<1>
is on the control screen when it opens.
or do no operations for five minutes.
<3>
.
<1> <1>
<2> <2>
<3> <3>
<1>
.
.
.
appears on the control screen. This button limits operations and
<3> <3>
<2> <2>
Owner's Manual
<2>
)
EN
51-