Samsung BP59-00136C-02 Owner's Instructions Manual page 27

MENU
Test Pattern
Factory Default
Video Type
3-5-4. Option
MENU
Language
Menu Option
Sleep Timer
Information
Using
Generated by the projector itself. Utilized as standard to optimize the installation of the projector.
• <Crosshatch > - You can check whether the picture is distorted or not.
• <Screen Size > - You can refer to picture format sizes such as 1.33 : 1 or 1.78 : 1.
• <Red> - Red Screen, only for color adjustment.
• <Green > - Green Screen, only for color adjustment.
• <Blue > - Blue Screen, only for color adjustment.
• <White > - White Screen, only for color adjustment.
• <6500K_White > - White Screen, brings out the white tones for a more real white.
The Red/Green/Blue colors of the test patterns are only for the color adjustment procedures, and may
not comply with the actual colors displayed during video playback.
Using this function, you can reset various settings to the factory default.
In PC mode, if the projector does not recognize the type of input signal automatically and the screen
quality is abnormal, you can select the
• <Auto > : The type of input signal is recognized automatically.
• <RGB> : Select this when a PC providing RGB output is connected to the D-sub terminal.
• <YCbCr>: Select this when an AV device (STB, DVD, etc.) providing YPbPr output is connected to the D-
sub terminal.
You can select the language used for the menu screen.
The selected language is applied to both main OSD and MEDIA PLAY menus.
• <Position> : You can move Menu Position up/down/left/right.
• <Transparency > : You can set the translucency of menu.
•< High>-<Medium >-<Low>-<Opaque>
• <Display Time > : You can set the display time of the menu.
•<5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-<Stay On >
If there is no input signal for the specified time, the projector is turned off automatically.
(There must be no button input from the remote control or on the top of the projector for the specified
time)
• <Off> - <10 min> - <20 min> - <30 min>
This function does not work in
You can check external source signals, picture setup, PC picture adjustment.
DESCRIPTION
type of input signal manually.
DESCRIPTION
<MEDIA PLAY> mode.
3-5