Using The Screen Adjustment Menu (Osd: On Screen Display) - Samsung BP59-00136C-02 Owner's Instructions Manual

CLASSIFICA
TION
Action 1 When the cooling fan system is
not in normal operating condi-
tion.
Action 2 When the lamp cover protecting
the lamp unit is not properly
closed or the sensor system is
not in normal operating condi-
tion.
Action 3 When temperature inside of the
projector becomes too high.
Action 4 When the color wheel fails to
operate.
Action 5 The lamp malfunctions after
power turns off abnormally or
after powering on right after
turning off the projector.
Action 6 When the screen becomes
darker
This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may cause noise,
which does not affect the product performance and is part of normal operation.
3-5

Using the Screen Adjustment Menu (OSD: On Screen Display)

The Screen Adjustment Menu (OSD: On Screen Display) Structure
MENU
Input
Picture
Setup
Option
Using
STATE
If the symptom remains even after disconnecting and then reconnecting
the power cord and turning the projector on again,
vice
Check whether the screws at the bottom side of the projector are fastened
correctly. If they are abnormally fastened,
ter.
Adjust the installation state of your projector by referring to the Installation
Precautions section listed above. Cool down your projector sufficiently and
then operate it again. If the same problem occurs continually,
Samsung
Disconnect and reconnect the power cord and start the projector again. If
the same symptom still occurs,
Turn the power off, wait for a sufficient amount of cooling time and then
turn the power on to operate. If the same problem occurs continually,
tact a Samsung
Check the lamp usage time on the Information Display screen. If you need
to replace the lamp,
Source List Edit Name
Mode Size
Film Mode PC
Install V-Keystone
Video Type
Language Menu Option
MEASURES
center.
service center.
service center.
contact a Samsung
SUB-MENU
Position
Zoom
Background
Sleep Timer
contact a Samsung
contact a Samsung
contact a Samsung service
service center.
Digital NR Black Level
Test Pattern Factory Default
Information
ser-
service cen-
contact a
center.
con-
3-5