Memorizing The Channels - Samsung SP-50L6HV Owner's Instructions Manual

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" and cable channels.
After the available channels are memorized, use the CH
channels. This eliminates the need to change channels by entering the channel digits. There are three
steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic)
and adding and deleting channels (manual).
Selecting the Video Signal Source
Before your television can begin memorizing the available channels,
you must specify the type of signal source that is connected to the TV
(i.e., an air or cable system).
1
Press the MENU button.
Press the ... or † button to
select "Channel", then press
the ENTER button.
2
Press the ENTER button to
to select "Air / Cable"
3
Press the ... or † button to
select "Air", "STD", "HRC"
or "IRC", then press the
ENTER button.
• If you are using an Air antenna, leave "Air" displayed.
If you are using a cable antenna, press the ... or † button to
display the type of cable system: "STD",
(If you are not sure which type of cable system you have,
contact your cable company).
Press the EXIT button to exit.
NOTE
• STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable
system that exists in your particular area. At this point the signal
source has been selected. Proceed to "Storing Channels in
Memory" (Next page).
and CH buttons to scan through the
TV
Air / Cable
Auto Program
Channel Manager
Name
Fine Tune
LNA
Move
TV
Air / Cable
Auto Program
Channel Manager
Name
Fine Tune
LNA
Move
"HRC" or "IRC".
Channel
:Air
:Off
Enter Return
Channel
: Air
Air
STD
HRC
IRC
:Off
Enter Return
English - 31