O
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air"
(antenna) and cable channels. After the available channels are memorized, use the
CH
to change channels by entering the channel digits. There are three steps for memo-
rizing channels: selecting a broadcast source, memorizing the channels (automatic)
and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e., an antenna or
a cable system).
34
P E R AT I O N
and CH
buttons to scan through the channels. This eliminates the need
1
Press the MENU button.
Press the ▼ button to
select "Channel", then
press the ENTER button.
2
Press the ENTER button
to select "Select
Antenna", then press the
ENTER button.
Press the ▼ button to
select "Air" or "Cable",
then press the ENTER
button.
3
Press the ▼ button to
select "Memorize
Channels", then press
the ENTER button.
T V
Channel
Select Antenna
: Air
Select Favorite Channels
Memorize Channels
Add & Delete Channels
Fine Tune Channels
Check Signal Strenght
T V
Channel
Select Antenna
: Air
Select Favorite Channels
Memorize Channels
Add & Delete Channels
Fine Tune Channels
Check Signal Strenght
T V
Channel
Select Antenna
: Air
Select Favorite Channels
Memorize Channels
Add & Delete Channels
Fine Tune Channels
Check Signal Strenght
Air
Cable