Calmetrix I-Cal 8000 User Manual page 39

12. You can later open and edit an existing model by clicking on Load Model (g)
Now you're ready to use the setting time prediction tool
Once a model has been established for a given mixture, it can be used to predict early and late times of
set of the same mixture by using only a calorimetry curve. To use the prediction tool, proceed as
follows:
7. Click on the "Data Analysis" tab.
8. Click on "Add Analysis Logs" (A) to select the calorimetry data for which you would like to make a
setting time prediction and click OK. You can add up to 8 calorimetry curves.
38
(b)
(c)
(d)
(a)
(f)
(e)
(g)