Calmetrix I-Cal 8000 User Manual page 14

Calmetrix I-Cal 8000 User Manual © 2010 - 2012 Calmetrix Inc. – All rights reserved
cementitious material. You MUST enter the data for each SCM if included in the sample in order to
be able to plot Power per Unit later.
Box (e) – Content, Coarse and Fine Aggregate - Enter coarse and fine aggregate mass per mix design
if testing mortar or concrete. (Do not enter coarse aggregates if these have been removed from mix
prior to sampling). As with SCMs, you MUST enter data for coarse and fine aggregate if included in
sample
Plot area.
(f)
Right-click on the x or y-axis to change scaling from Automatic to Manual. In Manual mode, you can
adjust the min and max using the cursor.
Click on a graph legend/color on the right of the screen to change the appearance (color, line type,
etc.).
Click on the Zoom and Motion tools on top (f) to zoom in/out or move the graph.
13