To Connect The Alarm Output; To Connect The Space Cooling/Heating On/Off Output; To Connect The Changeover To External Heat Source; Finishing The Outdoor Unit Installation - Daikin EBLQ011CA3V3 Installer's Reference Manual

X2M
A4P
10
9
8
7
X1M
X8M
S5P S6P
2 Fix the cable with cable ties to the cable tie mountings.
7.7.17

To connect the alarm output

INFORMATION
▪ Requires option box EK2CB07CAV3.
▪ To be connected to option box EK2CB07CAV3.
1 Connect the alarm output cable to the appropriate terminals as
shown in the illustration below.
X2M
A4P
15
13
X1M
X8M
2 Fix the cable with cable ties to the cable tie mountings.
7.7.18 To connect the space cooling/heating ON/
OFF output
INFORMATION
▪ Requires option box EK2CB07CAV3.
▪ To be connected to option box EK2CB07CAV3.
1 Connect the space cooling/heating ON/OFF output cable to the
appropriate terminals as shown in the illustration below.
EBLQ+EDLQ011~016CA3V3+W1 + EK(2)CB07CAV3
Daikin Altherma low temperature monobloc
4P538847-1 – 2018.05
X1M
2 Fix the cable with cable ties to the cable tie mountings.
7.7.19 To connect the changeover to external
heat source
INFORMATION
▪ Requires option box EK2CB07CAV3.
▪ To be connected to option box EK2CB07CAV3.
1 Connect the changeover to external heat source cable to the
appropriate terminals as shown in the illustration below.
X1M
2 Fix the cable with cable ties to the cable tie mountings.
7.8 Finishing the outdoor unit
installation
7.8.1

To close the outdoor unit

1 Close the switch box cover.
2 Mount the top plate and the front plate.
NOTICE
When closing the outdoor unit cover, make sure that the
tightening torque does NOT exceed 4.1 N•m.
7.9 Finishing the control box
installation
7.9.1

To close the control box

1 Close the front plate.
7.10 Finishing the option box
installation
7.10.1

To close the option box

1 Close the front plate.
7 Installation
1 2
X8M
4 3
X8M
L N
Installer reference guide
41