System Setup Menu - Samsung ML ML-4050N User Manual

Graphic menu
Use the Graphic menu to change settings affecting the quality of the
printed characters and images.
Item
Resolution Specify the number of dots printed per inch (dpi).
The higher the setting, the sharper printed
characters and graphics.
• If your print jobs are mostly text, select
for the highest quality printing.
Normal
• Select 1200dpi-Best
bitmapped images, such as scanned photos or
some graphics, that will benefit from enhanced
line screening.
Darkness You can lighten or darken the print on the page by
changing the toner density setting. The
setting usually produces the best result. Use the
toner density setting to save toner.
Light
Image This item enhances the print quality.
Enhance
• : Doesn't enhance the quality.
Normal
•
Text Enhance
figures.

System Setup menu

Use the System Setup menu to configure a variety of printer features.
Item
Date & Time See page 10.6 and 10.8.
Form Menu
Note
Select Form
• This menu item is available when the
optional hard disk is installed.
Language This setting determines the language of the text
that appears on the control panel display and
information printing.
Power Save When the printer does not receive data for an
extended period of time, power consumption is
automatically lowered. You can set how long the
printer waits before going to power save mode.
Explanation
600dpi-
when your job contains
Normal
: Enhances letters and simple
Explanation
Item
Auto This item determines whether or not the printer
Continue continues printing when it detects the paper
unmatched to your paper setting.
• Off: If a paper mismatch occurs, an error
message will remain on the display and the
printer will remain off-line until you insert the
correct paper.
• On: If the paper mismatch occurs, an error
message will display. The printer will go offline
for 30 seconds, then automatically clear the
message and continue printing.
Altitude Adj. You can optimize print quality according to your
altitude.
Auto CR This item allows you to append the required
carriage return to each line feed.
Refer to the following samples:
Job Timeout You can set the length of time the printer waits
before printing the last page of a print job that
does not end with a command to print the page.
When a print time-out occurs, the printer prints the
page in the print buffer.
Maintenance This item allows you to maintain your printer.
•
Clean Drum
cartridge and produces a cleaning sheet with
toner debris on it.
•
Clean Fuser
printer and produces a cleaning sheet with
toner debris on it.
•
CLR Empty MSG.
Replace Toner
display. Once you have selected On, this
setting will be permanently written to the
memory of the toner cartridge, and this menu
will be disappeared from the
menu.
•
Supplies Life
pages have been printed and how much toner
are left in the cartridge.
Clear Setting This menu item allows you to restore the printer's
factory default settings.
2.4
<System setup>
Explanation
AA AA
BB BB
CC CC
LF LF+CR
: Cleans the OPC drum of the toner
: Cleans the fuser unit inside of the
: Prevents the
Toner Low
message from appearing on the
Maintenance
: Allows you to check how many