1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Printer
  5. ML-4050N
  6. User manual

Samsung ML ML-4050N User Manual

Samsung monochrome laser printer user's guide
Hide thumbs Also See for ML ML-4050N:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for Samsung ML ML-4050N

Summary of Contents for Samsung ML ML-4050N

  • Page 2 This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this manual. © 2007 Samsung Electronics Co., Ltd. All rights reserved.
  • Page 3 SAMSUNG WORLD WIDE ONTACT If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. Country Customer Care Center ARGENTINE 0800-333-3733 AUSTRALIA 1300 362 603 BELGIUM 02 201 2418 BRAZIL 0800-124-421 4004-0000 CANADA 1-800-SAMSUNG (7267864)

  • Page 4: Table Of Contents

    Printing a demo page ... 2.6 Changing the display language ... 2.6 Using toner save mode ... 2.6 3. Software overview Supplied software ... 3.1 Printer driver features ... 3.2 System requirements ... 3.2 4. Network setup Introduction ... 4.1 Supported operating systems ... 4.2 Configuring TCP/IP ...
  • Page 5 Common Macintosh problems ... 9.14 10. Installing accessories Precautions when installing accessories ... 10.1 Installing a memory DIMM ... 10.1 Installing a wireless network interface card ... 10.3 Using the hard disk ... 10.5 11. Specifications Printer specifications ... 11.1...

  • Page 6: Safety And Regulatory Information

    Environmental and Safety Consideration Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere, is certified as a Class I laser product conforming to the requirements of IEC 825.

  • Page 7: Radio Frequency Emissions

    Power Saver This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. Recycling Please recycle or dispose of packaging materials for this product in an environmentally responsible manner.
  • Page 8 PSTNs and compatible PBXs of the European countries: In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance. The product has been tested against TBR21 and/or TBR 38. To assist in the...

  • Page 9: Regulatory Compliance Statements

    The power output of the wireless device or devices that may be embedded in your printer is well below the RF exposure limits as known at this time. Because the wireless devices (which may be embedded into your printer) emit less energy than is allowed in radio frequency safety standards and recommendations, manufacturer believes these devices are safe for use.
  • Page 10 E U D e c la r a ti o n o f Co n f o r m it y ( R & T T E ) W e , Sa m s u n g E le c tr o n ic s C o ., L t d . Sam sung Electronics Co., Ltd.

  • Page 11: Introduction

    • Selecting a location Special features Your new printer is equipped with several special features that improve the print quality. You can: Print with excellent quality and high speed • You can print up to 1200 x 1200 dpi effective output.
  • Page 12 • You can use various print features, such as storing a job in the hard disk, proofing a job, and printing private documents. • You can manage the print jobs in the print queue of the printer hard disk. For details, see page 10.5.

  • Page 13: Printer Overview

    Printer overview Front view * The figure above shows an ML-4050N with all available options. output tray control panel control board cover tray 1 optional tray 2 optional tray 3 optional tray 4 Rear view handle paper level indicator multi-purpose tray...

  • Page 14: Finding More Information

    Stop: Stops an operation at any time. Status: Indicates the status of your printer. See page 9.6. Finding more information You can find information for setting up and using your printer from the following resources, either printed or onscreen. Quick Install...

  • Page 15: Selecting A Location

    The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the printer close to the edge of your desk or table. Clearance space Front: 482.6 mm (enough...

  • Page 16: System Setup

    2.2. Accessing control panel menus You can control your printer from the printer’s control panel. You can also set the control panel menus while printing. Press Menu until the menu you want appears on the bottom line of the display and press OK.

  • Page 17: Menu Overview

    Menu overview The control panel menus are used to configure the printer. The control panel provides access to the foling menus. The menus in the colored characters appear only when the optional items are installed. 0.Job Manage. (See page 10.7.)

  • Page 18: Layout Menu

    When you select any other value except Auto from Paper Source and the selected tray is empty, you can set the printer automatically to print from other trays. If this menu item is set to Off, the default LED lights red and the printer doesn’t work until you insert...

  • Page 19: System Setup Menu

    : Doesn’t enhance the quality. Normal • : Enhances letters and simple Text Enhance figures. System Setup menu Use the System Setup menu to configure a variety of printer features. Item Explanation Date & Time See page 10.6 and 10.8. Form Menu Note Select Form •...

  • Page 20: Emulation Menu

    Auto Wrap <System setup> Explanation You can select whether your printer prints an error list when a PS error occurs. • Select On to print PS 3 emulation errors. If an error occurs, the job stops processing, the error message prints, and the printer flushes the job.

  • Page 21: Printing A Demo Page

    Press Toner Save on the control panel. The printer must be in Standby mode; the Status LED lights green and Ready is shown on the display. • If the button backlight is on, the mode is enabled and the printer uses less toner to print a page.

  • Page 22: Software Overview

    Printer driver features • System requirements Supplied software You must install the printer software using the supplied CDs after you have set up your printer and connected it to your computer. Each CD provides you with the following software: printer Windows •...

  • Page 23: Printer Driver Features

    • Paper source selection • Paper size, orientation and media type • Number of copies In addition, you can use various special printing features. The following table shows a general overview of features supported by your printer drivers: PCL 6 Feature...
  • Page 24 Linux Item Requirements Operating system • Red Hat 8.0 ~ 9.0 • Fedora Core 1 ~ 4 • Mandrake 9.2 ~ 10.1 • SuSE 8.2 ~ 9.2 Processor Pentium IV 1 GHz or higher 256 MB or higher Free disk page 1 GB or higher Software •...

  • Page 25: Network Setup

    Once you have connected your printer to a network with an RJ-45 Ethernet cable, you can share the printer with other network users. You need to set up the network protocols on the printer to use it as your network printer. Protocols can be set up by the following two methods: Via network administration programs You can configure your printer’s print server settings and manage the...

  • Page 26: Supported Operating Systems

    • BOOTP: Bootstrap Protocol Configuring TCP/IP Your printer can be set up with a variety of TCP/IP network information, such as an IP address, a subnet mask, a gateway, and DNS addresses. There are several ways in which your printer can be assigned a TCP/IP address, depending on your network.

  • Page 27: Configuring Ipx Frame Types

    To use IPX/SPX protocol networks (for example, Novell NetWare), the format of the network communication frames must be specified for the printer. In most cases, you can keep the Auto setting. However, you can manually set the frame type format, if required. Take the following step...

  • Page 28: Loading Print Media

    • Some print media may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Samsung has no control. • Before purchasing large quantities of print media, ensure that it meets the requirements specified in this user’s guide.

  • Page 29: Supported Sizes Of Paper

    Supported sizes of paper Type Size Plain paper Letter Legal Folio Oficio JIS B5 ISO B5 Executive Envelope Envelope B5 Envelope Monarch Envelope COM-10 Envelope DL Envelope C5 Envelope C6 Transparency Letter, A4 Labels Letter, Legal, Folio, Oficio, A4, JIS B5, ISO B5, Executive, A5, A6 Card stock...

  • Page 30: Guidelines For Selecting And Storing Print Media

    - Carbonless paper and Tracing paper. • Use of these types of paper could result in paper jams, chemical smells, and damage to your printer. • Store print media in its ream wrapper until you are ready to use it.

  • Page 31: Loading Paper

    Exposed adhesive can also cause damage to printer components. • Do not run a sheet of labels through the printer more than once. The adhesive backing is designed for only a single pass through the printer.

  • Page 32: Changing The Size Of The Paper In The Tray

    Using the standard tray or the optional trays Load the print media you use for the majority of your print jobs in the standard tray. The standard tray can hold a maximum of 500 sheets of 75 g/m (20 lb) paper. To load paper, pull open the tray and load paper with the side to be printed on face down.

  • Page 33: Using The Multi-Purpose Tray

    • Transparencies: Print side up and the top with the adhesive strip entering the printer first. • Labels: Print side up and the top short edge entering the printer first. • Preprinted paper: Design side up and the top edge entering the printer first.

  • Page 34: Using Manual Feed Mode

    The printer picks up the print media and prints. After one page is printed, the message appears again. Note • If you do not press the button, after a pause the printer will automatically pick the print media. Insert the next sheet into the multi-purpose tray and press Stop.

  • Page 35: Selecting An Output Location

    The printer has two output locations; the rear cover (face up) and the output tray (face down). The printer sends output to the output tray by default. To use the output tray, make sure that the rear cover is closed.

  • Page 36: Basic Printing

    Printers. For Windows XP/2003, select Printers and Faxes. For Windows Vista, select Control Panel → Hardware and Sound → Printers. Double-click the Samsung ML-4050 Series PCL 6 or Samsung ML-4050 Series PS icon. From the Document menu, select Me) or (Windows NT 4.0/2000/XP/2003/Vista).

  • Page 37: Ordering Supplies And Accessories

    Depending on your country, wireless LAN cards may not be available. Contact your local Samsung dealer or the retailer where you bought your printer. <Ordering supplies and accessories> Part number ML-D4550A...

  • Page 38: How To Purchase

    How to purchase To order Samsung-authorized supplies or accessories, contact your local Samsung dealer or the retailer where you purchased your printer, or visit www.samsungprinter.com and select your country/region for information on calling for technical support. <Ordering supplies and accessories>...

  • Page 39: Maintenance

    Cleaning the outside of the printer Clean the cabinet of the printer with a soft, lint-free cloth. You can dampen the cloth slightly with water, but be careful not to let any water drip onto or into the printer.
  • Page 40 Caution • While cleaning the inside of the printer, be careful not to touch the transfer roller, located underneath the toner cartridge. Oil from your fingers can cause print quality problems.

  • Page 41: Maintaining The Toner Cartridge

    This process will produce a page with toner debris, which should be discarded. Make sure that the printer is turned on with paper loaded in the tray. Press Menu until System Setup appears on the bottom line of the display and press OK.

  • Page 42: Replacing The Toner Cartridge

    Caution • Avoid reaching too far into the printer. The fusing area may be hot. • To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary.
  • Page 43 Tabs on the sides of the cartridge and corresponding grooves within the printer will guide the cartridge into the correct position until it locks into place completely. Close the top cover. Make sure that the cover is securely closed.

  • Page 44: Maintenance Parts

    Transfer roller Approx.150,000 pages Fuser unit Approx.150,000 pages Paper feeding roller Approx.150,000 feeds Rubber pad Approx.150,000 feeds Samsung highly recommends that an authorized service provider, dealer or the retailer where you bought printer performs this maintenance activity. Yield (Average) <Maintenance>...

  • Page 45: Troubleshooting

    Common Linux problems Clearing paper jams Note • When removing paper that is jammed in the printer, if possible always pull the paper in the direction that it normally moves so as not to damage internal components. Always pull firmly and evenly;...

  • Page 46: In The Paper Feed Area

    If the paper does not move when you pull, or if you do not see the paper in this area, check the fuser area around the toner cartridge. See page 9.3. Insert the tray 1 into the printer until it snaps into place. Printing automatically resumes. In the optional tray Pull the optional tray open.

  • Page 47: Around The Toner Cartridge

    In the multi-purpose tray If the paper is not feeding properly, pull the paper out of the printer. Open and close the top cover to resume printing. Around the toner cartridge Caution • The fuser area is hot. Take care when removing paper from the printer.

  • Page 48: In The Duplex Unit Area

    Note • The duplex unit is optional depending on your machine. Duplex jam 0 Lift up the duplex unit, and pull it out of the printer. Locate the jammed paper and remove it. Insert the duplex unit into the slot.

  • Page 49: Troubleshooting Checklist

    • Do not overload the tray. Ensure that the paper level is below the paper capacity mark on the inside wall of the tray. • Do not remove paper from the tray while your printer is printing. • Flex, fan, and straighten paper before loading.

  • Page 50: Understanding The Status Led

    Understanding display messages Messages appear on the Smart Panel program window or the control panel display to indicate the printer’s status or errors. Refer to the tables below to understand the messages’ meaning and correct the problem if necessary. Messages and their meanings are listed in alphabetical order.
  • Page 51 9.2. optional tray. The printer is Complete your printing jobs. printing. The printer is on-line Use your printer. and ready to print. The LSU (Laser Please wait a few Scanning Unit) in minutes. your printer is checking some problems detected.

  • Page 52: Toner Cartridge-Related Messages

    Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations. You can select either Stop or Continue. If you do not select any, the printer will work as Stop is selected. If you select Stop, you cannot print until the genuine cartridge is installed. However, you can still print any kind of reports.

  • Page 53: Printer Specifications

    Solving general printing problems For problems with the operation of your printer, refer to the table for suggested solutions. Condition Possible cause Suggested solutions The printer The printer is not Check the power cord does not receiving power. connections. Check the power print.
  • Page 54 If using Windows From the Start menu, choose extremely 98/Me, the Settings and Printers. Right- slow. Spooling Setting click the Samsung ML-4050 may be set Series PCL 6 printer icon, (Continued) incorrectly. choose Properties, click the Details tab, and then choose the Spool Settings button.

  • Page 55: Solving Print Quality Problems

    Solving print quality problems Dirt inside of the printer or improper paper loading may reduce print quality. See the table below to troubleshoot problems. Condition Suggested solutions Light or faded If a vertical white streak or faded area appears...
  • Page 56 See page 8.4. • Parts of the printer may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages.

  • Page 57: Common Windows Problems

    • The toner cartridge may be defective. Install a new toner cartridge. See page 8.4. • If the problem persists, the printer may require repair. Contact a service representative. Curl If the printed paper is curled or paper does not feed into the printer: •...

  • Page 58: Common Linux Problems

    Reader. Common Linux problems Condition Suggested solutions • Check if the printer driver is installed in your system. Open Unified Driver Configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list.

  • Page 59: Installing Accessories

    Your printer has a dual in-line memory module (DIMM) slot. Use this DIMM slot to install additional memory. Your printer has 64 MB of memory which can be expanded to 512 MB. For information about ordering optional DIMMs, see page 7.1.
  • Page 60 Setting the memory in the PostScript printer properties After installing the DIMM, you need to select it in the printer properties of the PostScript printer driver to enable its use. Make sure that the PostScript printer driver is installed on your computer.

  • Page 61: Installing A Wireless Network Interface Card

    Removing a DIMM To expand the printer memory to 512 MB, you need to remove the preinstalled 64 MB DIMM and install two 256 MB DIMMs into the DIMM slots. Push the latches at both ends of the DIMM slot away to remove the DIMM and pull out the DIMM.
  • Page 62 In Infrastructure mode, network cards communicate with each other through an access point, which allows both wireless and cabled cards to send files to the printer. If you select Auto, the printer selects the operation mode automatically, according to the network cable’s connection each time it boots up.

  • Page 63: Using The Hard Disk

    Installing the hard disk allows the data from your computer to be sent to the print queue of the printer hard disk. This decreases the workload of the computer. You can also use various print features, such as storing a job in the hard disk, proofing a job, and printing private documents.

  • Page 64: Printing With The Optional Hard Disk

    For Windows XP/2003, select Printers and Faxes. For Windows Vista, select Control Panel → Hardware and Sound → Printers. Select the Samsung ML-4050 Series PCL 6 printer icon or Samsung ML-4050 Series PS printer icon. Click the right mouse button on the printer icon and select Properties.
  • Page 65 All of the print jobs waiting to be printed are listed in the Active Job Queue in the order you sent them to the printer. You can delete a job from the queue before printing, or promote a job to print sooner.
  • Page 66 You can store up to 10 form files in the hard disk and make them printed with your document. First, you need to create a form file using the printer driver. See the Software section. Press Menu until System Setup appears on the bottom line of the display and press OK.

  • Page 67: Specifications

    , PostScript 3, IBM, EPSON Memory 64 MB (Max. 512 MB) 32, 64, 128, or 256 MB optional memory available Use only the Samsung-approved DIMM. Display 16 characters x 2 lines Fonts 1 bitmap, 45 scalable, 136 PostScript 3 fonts,...
  • Page 68 NDEX accessories installing DIMM 10.1 hard disk 10.5 network interface card/device 10.3 order information 7.1 cleaning drum 8.3 inside 8.1 outside 8.1 cleaning sheet, print 8.3 component location 1.3 control panel buttons 1.4 menus 2.1 status LED 9.6 demo page, print 2.6 DIMM, install 10.1 display language, change control panel 2.6...
  • Page 69 5.8 redistributing, toner cartridge 8.3 replacing, toner cartridge 8.4, 8.6 special print media, guidelines 5.3 specification, printer 11.1 status LED, meaning 9.6 supplies checking life 8.3 order information 7.1 system requirements Linux 3.3 Macintosh 3.3 Windows 3.2 toner cartridge checkig remaining toner 8.3...

  • Page 70: Software Section

    Samsung Printer Software section...
  • Page 71 OFTWARE SECTION ONTENTS NSTALLING Chapter 1: Installing Printer Software ... 4 Installing Software for Local Printing ... 4 Installing Software for Network Printing ... 7 Changing the Software Language ... 10 Reinstalling Printer Software ... 10 Removing Printer Software ... 11...
  • Page 72 Setting Up a Client Computer ... 25 SING MART Chapter 7: Understanding Smart Panel ... 26 Opening the Troubleshooting Guide ... 27 Using Printer Settings Utility ... 27 Using Onscreen Help File ... 27 Changing the Smart Panel Program Settings ... 27 CRIPT RIVER RINT...
  • Page 73 Printing Files ... 32 SING RINTER WITH A Chapter 9: Installing Software for Macintosh ... 33 Setting Up the Printer ... 34 For a Network-connected Macintosh ... 34 For a USB-connected Macintosh ... 34 Printing ... 35 Printing a Document ... 35 Changing Printer Settings ...

  • Page 74: Installing Printer Software In Windows

    Installing Software for Local Printing A local printer is a printer directly attached to your computer using the printer cable supplied with your printer, such as a USB or parallel cable. If your printer is attached to a network, skip this step and go to “Installing Software for Network Printing”...

  • Page 75: Custom Installation

    If the test page prints out correctly, click Yes. If not, click No to reprint it. To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site.
  • Page 76 • After connecting the printer, click Next. • If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.

  • Page 77: Installing Software For Network Printing

    To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site. Otherwise, just click Finish. Installing Software for Network Printing When you connect your printer to a network, you must first configure the TCP/IP settings for the printer.
  • Page 78 Select the printer you want to install from the list and then click Next. • If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.
  • Page 79 Select the printer you want to install from the list and then click Next. • If you do not see your printer on the list, click Update to refresh the list, or select Add TCP/IP Port to add your printer to the network. To add the printer to the network, enter the port name and the IP address for the printer.

  • Page 80: Changing The Software Language

    After the installation is finished, a window appears asking you to print a test page and to register yourself as a user of Samsung Printers in order to receive information from Samsung. If you so desire, select the corresponding checkbox(es) and click Finish.

  • Page 81: Removing Printer Software

    • After connecting the printer, click Next. • If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation.

  • Page 82: Basic Printing

    Please refer to the OS Compatibility section of Printer Specifications in your Printer User’s Guide. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. The following procedure describes the general steps required for printing from various Windows applications.

  • Page 83: Printer Settings

    Printer Settings You can use the printer properties window, which allows you to access all of the printer options you need when using your printer. When the printer properties are displayed, you can review and change the settings needed for your print job.

  • Page 84: Paper Tab

    Cotton: 20 lb to 24 lb (75~90 g/m2) cotton paper such as Gilbert 25 % and Gilbert 100 %. Plain Paper: Normal plain paper. Select this type if your printer is monochrome and printing on the 16 lb (60 g/m2) cotton paper.

  • Page 85: Graphics Tab

    • On: Select this option to allow the printer to use less toner on each page. • Off: If you don’t need to save toner when printing a document, select this option.

  • Page 86: Extras Tab

    ID, job name before printing the document. When several users send a print job to the printer, this option allows you to easily find your printing from the output tray. Some printers do not support this feature.

  • Page 87: About Tab

    To use a saved setting, select the item from the Favorites drop down list. The printer is now set to print according to the Favorites setting you selected. To delete a Favorites item, select it from the list and click Delete.

  • Page 88: Advanced Printing

    User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is similar. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. This chapter includes: •...

  • Page 89: Printing Posters

    Printing Booklets This printer feature allows you to print your document on both sides of the paper and arranges the pages so that the paper can be folded in half after printing to produce a booklet.

  • Page 90: Printing On Both Sides Of Paper

    Click OK and print the document. : If your printer does not have a duplex unit, you should complete the printing job manually. The printer prints every other page of the document first. After printing the first side of your job, the Printing Tip window appears.

  • Page 91: Using Watermarks

    “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document. There are several predefined watermarks that come with the printer, and they can be modified, or you can add new ones to the list. Using an Existing Watermark To change the print settings from your software application, access printer properties.

  • Page 92: Using Overlays

    Regards WORLD BEST print a letter with your company’s letterhead, you do not need to load preprinted letterhead paper in the printer. You need only tell the printer to print the letterhead overlay on your document. Creating a New Page Overlay To use a page overlay, you must create a new page overlay containing your logo or image.

  • Page 93: Using Windows Postscript Driver

    CD-ROM to print a document. PPDs, in combination with the PostScript driver, access printer features and allow the computer to communicate with the printer. An installation program for the PPDs is provided on the supplied software CD-ROM. This chapter includes:...

  • Page 94: Using Direct Print Utility

    Direct Print Utility program. • Depending on the memory size supported by your printer, PDF files can not be printed using the Direct Print Utility program. Expand the memory. • The Direct Print Utility program supports PDF version 1.4 and below.

  • Page 95: Sharing The Printer Locally

    Please refer to the OS Compatibility section of Printer Specifications in your Printer User’s Guide. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. Setting Up a Host Computer Start Windows.

  • Page 96: Using Smart Panel

    Programs or All Programs → your printer driver name → Smart Panel. OTES • If you have already installed more than one Samsung printer, first select the printer model you want in order to use the corresponding Smart Panel. Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel icon and select your printer name.

  • Page 97: Opening The Troubleshooting Guide

    Driver Setting (Only for Windows) You can use the printer properties window, which allows you to access all of the printer options you need for using your printer. For details, See “Printer Settings” on page 13. Opening the Troubleshooting Guide Using the troubleshooting guide, you can view solutions for error status problems.

  • Page 98: Using Your Printer In Linux

    • Configuring Printer Properties • Printing a Document Getting Started The supplied CD-ROM provides you with Samsung’s Unified Linux Driver package for using your machine with a Linux computer. After the driver is installed on your Linux system, the driver package allows you to monitor a number of machine devices via fast ECP parallel ports and USB simultaneously.

  • Page 99: Uninstalling The Unified Linux Driver

    When the installation is complete, click Finish. The installation program has added the Unified Driver Configurator desktop icon and Samsung Unified Driver group to the system menu for your convenience. If you have any difficulties, consult the onscreen help that is...

  • Page 100: Using The Unified Driver Configurator

    Printers configuration has the two tabs: Printers and Classes. Printers Tab You can see the current system’s printer configuration by clicking on the printer icon button on the left side of the Unified Driver Configurator window. Switches to Printer configuration.

  • Page 101: Ports Configuration

    • Refresh : Renews the classes list. • Add Class... : Allows you to add a new printer class. • Remove Class : Removes the selected printer class. Ports Configuration In this window, you can view the list of available ports, check the status of each port and release a port that is stalled in busy state when its owner is terminated for any reason.

  • Page 102: Printing A Document

    To abort the current job, click Cancel. Printing Files You can print many different types of files on the Samsung machine device using the standard CUPS way - directly from the command line interface. The CUPS lpr utility allows you do that.

  • Page 103: Using Your Printer With A Macintosh

    Double-click the MAC_Installer folder. Double-click the MAC_Printer folder. For Mac OS 8.6~9.2, double-click the Samsung LBP Installer Classic icon. For Mac OS 10.1 or higher, double-click the Samsung LBP Installer OSX icon. Click Continue. Click Install. After the installation is finished, click Quit.

  • Page 104: Setting Up The Printer

    SEC000xxxxxxxxx from the printer box, where the xxxxxxxxx varies depending on your machine. Click Add. If Auto Select does not work properly, select Samsung in Printer Model and your printer name in Model Name. Your machine appears on the Printer List and is set as the default printer.

  • Page 105: Printing

    • You can check your printer name in the supplied CD- ROM. Printing a Document When you print with a Macintosh, you need to check the printer software setting in each application you use. Follow these steps to print from a Macintosh.

  • Page 106: Printing Multiple Pages On One Sheet Of Paper

    Normal and Text Enhance. Fit to Page This printer feature allows you to scale your print job to any selected paper size regardless of the digital document size. This can be useful when you want to check fine details on a small document.

  • Page 107: Duplex Printing

    Select the Layout. ▲ Mac OS 10.3 Select a binding orientation from Two Sided Printing option. Click Print and the printer prints on both sides of the paper. If you have selected duplex printing and AUTION then try to print multiple copies of a document, the printer may not print the document in the way you want.
  • Page 108 Windows 13 Linux driver, install 28 printer properties 31 printing 32 Macintosh driver install 33 printing 35 setting up the printer 34 MFP driver, install Linux 28 n-up printing Macintosh 36 Windows 18 orientation, print 32 Windows 13 overlay create 22...
  • Page 109 resolution Macintosh 36 Windows 15 toner save 15 true-type option 15 software install Macintosh 33 Windows 4 reinstall Windows 10 system requirements Macintosh 33 uninstall Windows 11 status monitor, use 26 toner save, set 15 uninstall, software Windows 11 uninstalling MFP driver Linux 29 watermark...
  • Page 110 www.samsungprinter.com Rev.1.01...

This manual is also suitable for:

Ml-4050nd

Table of Contents