Motion Detection - Samsung SNS-100/400 User Manual

SNS-100/400 Network Server
◊ RS485/422 Setup
Item
Baud Rate
Data Bit
Parity Bit
Stop Bit
When RS-485/422 setup configuration is incorrect, the PTZ camera motion may not work. See the users'
Note
manual for the connected camera and carefully configure it accordingly.
◊ Swing Setup
Item
First Preset / Second Preset
Mode
Speed
Duration
◊ Group Setup
Item
Group No.
Preset No.
Travel Speed
Dwell Time

4.2.7. Motion Detection

This sets up motion detection function of the network server.
◊ Motion Detection Configuration
Item
Channel Set Used when selecting the channel. (Applied only to 4 channel servers.)
Grid Display Basic grid, used to choose area on the screen, is displayed or hidden.
When selecting motion detection area, click <Select All> button to select all areas, or click <Deselect> button
Select Area
to cancel the selected area.
MD Enable Decide whether you use motion detection function.
Setting up sensitivity to detect motion to adjust input video by situation. You can select 1-5, and 5 is the
MD Sensitivity
highest.
26
Set the data transmission speed per second
Set the data transmission bit
Select error-check method when data is displayed
Set insert bit when data transmission is completed
Designate the two presets to be used in swing mode
Select movement method between the two points((Pan/Tilt Swing)
Set movement speed
Sets the stop time at one preset point
Sets the desired group number
Sets each point's preset number
Sets the travel speed between each point interval
Sets the stop time at each position
Description
Description
Description
Description